D-Link DGS-1510 Series Hardware Installation Manual - page 19
Other manuals for DGS-1510 Series:
Reference Manual
Manual is about: Gigabit Ethernet SmartPro Switch
of
64
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide
19
Attaching Brackets to a Switch for Rack Mounting
The Switch is mounted to a standard 19" rack using mounting brackets. Use the following diagrams as a
guide.
Figure 2–2 Attach mounting brackets to the Switch
Fasten the mounting brackets to the Switch using the screws provided. With the brackets attached
securely, the Switch can be mounted in a standard rack, as shown below.
NOTE: Please review the Installation Guidelines above before installing the Switch in a
rack. Make sure there is adequate space around the Switch to allow for proper air flow,
ventilation and cooling.
Installing the Switch in a Standard 19" Rack
Figure 2–3 Mount the Switch in a rack