D-Link DGS-3024 Manual - Unpacking And Setup

DGS-3024 Gigabit Ethernet Switch Manual

2 

Unpacking and Setup 

This chapter provides unpacking and setup information for the Switch. 

Packing List 

Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: 

•  A DGS-3024 24-Port Gigabit Layer 2 Ethernet Switch  

•  A mounting kit: 2 mounting brackets and screws 

•  Four rubber feet with adhesive backing 

•  One or two AC power cords 

•  A printed Quick Installation Guide 

•  D-View 5.1 demo CD-ROM 

•  This Manual with Registration Card on CD-ROM 

If any item is found missing or damaged, please contact your local D-Link reseller for replacement. 

Installation 

Use the following guidelines when choosing a place to install the Switch: 

•  The surface must support at least 4 kg.  

•  The power outlet should be within 1.82 meters (6 feet) of the device. 

•  Visually inspect the power cord and see that it is secured to the AC power connector. 

•  Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Do not place heavy 

objects on the Switch. 

3