D-Link DGS-3024 Manual - Reauthenticate Port(S)

DGS-3024 Gigabit Ethernet Switch Manual

Reauthenticate Port(s)  

This window allows you to reauthenticate a port or group of ports by choosing a port or group of ports by using the pull 

down menusFrom and To and clicking Apply. The Reauthenticate Port Tabledisplays the current status of the 

reauthenticated port(s) once you have clicked Apply.    

Click Configuration > Port Access Entity > Reauthenticate Port(s) to open the Reauthenticate Port(s) window: 

Figure 7- 59. Reauthenticate Port window 

This window displays the following information: 

Parameter            Description 

Port 

The port number of the reauthenticated port. 

MAC Address 

Displays the physical address of the Switch where the port resides. 

Auth State 

The Authenticator State will display one of the following: Initialize, Disconnected, 

Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth, 

and

N/A.

BackendState 

The Backend State will display one of the following: Request, Response, Success, Fail, 

Timeout, Idle, Initialize, 

and N/A. 

OpenDir 

Operational Controlled Directions are both and in. 

PortStatus 

The status of the controlled port can be Authorized, Unauthorized, or N/A. 

83