D-Link DI-1750 Installation Manual - page 9
DI-1750 Router
_______________________________________________________________________
9
Mechanical design:
External Outlook
Dimension: 445mm x 310mm x 45mm (L x W x H)
Power:
Feature
Detailed Description
Power input
110 ~ 264VAC
Power frequency
47 ~ 63Hz
Power dissipation
Max. 50W
Environmental specifications:
Feature
Detailed Description
Operating Temperature
0 ~ 40°C
Storage Temperature
-20 ~ 65°C
Operating Humidity
10% ~ 85%, noncondensing
Identifying External Components
D-Link DI-1750 Router is shipped with the following standard configuration which includes a 10/100Mbps Fast Ethernet
LAN Port, a Console Port and an AUX Port.
Table of Standard Configuration Ports of DI-1750:
Name
Features
Fast Ethernet Port
Rate: 10/100M auto-negotiation, STP (RJ45) port, with Active, Link &
100Mbps indicator LED’s
Console Port
Rate: 1200bps— 115200bps, RJ45 interface, with Active indicator light
AUX Port
Rate: 1200bps— 115200bps, RJ45 interface, with Active indicator light
Besides, there are two Network/Voice interface card slots, a power plug, a power On/Off switch, a ground pole and a vent for
proper air circulation to avoid overheating.
Front Panel
The following figure shows the front panel of the D-Link DI-1750:
The following table describes the components on the Router’s front panel:
Serial No.
Name
Description
1
PWR
Light ON indicates that the Router is powered ON
2
SYS
Light ON indicates that the system has started successfully
3
S1
Light ON indicates that there is an interface card in first slot
4
S2
Light ON indicates that there is an interface card in second slot