D-link technical support – ds-60x vpn to dir-130 page 1 of 13 ds-60x vpn to dir-130 configuration of dir-130 step 1: open your web browser and type in the ip address of the router (192.168.0.1 by default). Enter the username (admin by default) and password (blank by default), and then click ok. Step...
D-link technical support – ds-60x vpn to dir-130 page 2 of 13 step 3: configure the ipsec vpn as followed: • enable: check box to enable • name: enter a name for the vpn • local net/mask: enter the local network and subnet mask • remote ip: select remote user • authentication: enter your desired pre...
D-link technical support – ds-60x vpn to dir-130 page 3 of 13.
D-link technical support – ds-60x vpn to dir-130 page 4 of 13 the ipsec tunnel should now appear in the vpn profile list below. Configuration of ds-601/605 client vpn software step 1: click configuration and select profile settings. Step 2: click new entry to create a profile for the dir-130..
D-link technical support – ds-60x vpn to dir-130 page 5 of 13.
D-link technical support – ds-60x vpn to dir-130 page 6 of 13 step 3: name the profile dir-130 and click next. Step 4: select the type of communication media for the local side and click next..
D-link technical support – ds-60x vpn to dir-130 page 7 of 13 step 5: enter the remote gateway and click next. The ip can normally be found in the status page of the dir-130. Step 6: enter the pre-shared key in both the shared secret and confirm secret and click finish..
D-link technical support – ds-60x vpn to dir-130 page 8 of 13 step 7: select the dir-130 profile and click configure. Step 8: select ipsec general settings and select dh-group 2 (1024 bit ) from the dropdown menu under advanced options / pfs group..
D-link technical support – ds-60x vpn to dir-130 page 9 of 13 step 9: select policy editor, expand the ike policy list and select new entry. Step 10: configure the ike policy as followed: • name: enter a name for the policy (dir-130 in this example) • encryption: triple des • hash: sha • dh group: d...
D-link technical support – ds-60x vpn to dir-130 page 10 of 13 step 11: expand the ipsec policy and select new entry. Step 12: configure the ipsec policy as followed: • name: entry a name for the policy(dir-130 in this example) • transform: triple des • authentication: sha click ok and close..
D-link technical support – ds-60x vpn to dir-130 page 11 of 13 step 13: the ipsec general settings should be configured as followed: • gateway: wan ip address of the remote router • ike policy: select dir-130 from the dropdown menu • ipsec policy: select dir-130 from the dropdown menu • exch. Mode: ...
D-link technical support – ds-60x vpn to dir-130 page 12 of 13 step 15: select ip address assignment and configure it according to your settings. It is recommended to keep the default settings. Step 16: select remote networks and configure as followed: • network addresses: enter the remote network (...
D-link technical support – ds-60x vpn to dir-130 page 13 of 13 step 17: select firewall settings and set the enable stateful inspection to when connected. Click ok to save the settings and then click ok again to go back to the connection screen. Step 18: click connect to establish the vpn connection...
