1. DL manuals
  2. D-Link
  3. Wireless Router
  4. DIR-130 - Broadband VPN Router
  5. How To Set Up

D-Link DIR-130 - Broadband VPN Router How To Set Up

Other manuals for DIR-130 - Broadband VPN Router: Specifications, Configuration, User Manual, Application Note
Manual is about: 8-port VPN Router

Summary of DIR-130 - Broadband VPN Router

  • Page 1

    D-link technical support – how to setup an ipsec vpn connection between a dir-130 and di-80xhv page 1 of 10 how to setup an ipsec vpn connection between a dir-130 and di-80xhv this setup example uses the following network settings: in our example the ipsec vpn tunnel is established between two lans:...

  • Page 2

    D-link technical support – how to setup an ipsec vpn connection between a dir-130 and di-80xhv page 2 of 10 configuration of the dir-130 step 1. Log into the dir-130 by opening internet explorer and typing the lan address of the device. In our example we are using the default 192.168.0.1. Enter user...

  • Page 3

    D-link technical support – how to setup an ipsec vpn connection between a dir-130 and di-80xhv page 3 of 10 step 3: configure the ipsec vpn as followed: ipsec setting • enable: check box to enable • name: enter a name for the vpn • encapsulation mode:: tunnel • remote ip: select site to site and ent...

  • Page 4

    D-link technical support – how to setup an ipsec vpn connection between a dir-130 and di-80xhv page 4 of 10

  • Page 5

    D-link technical support – how to setup an ipsec vpn connection between a dir-130 and di-80xhv page 5 of 10 configuration of di804hv/808hv step 1: open your web browser and type in the ip address of the router (192.168.0.1 by default). Enter the username (admin by default) and password (blank by def...

  • Page 6

    D-link technical support – how to setup an ipsec vpn connection between a dir-130 and di-80xhv page 6 of 10 step 3: click on more under method and configure as followed: tunnel name: the name of the tunnel should already be entered if done in the previous step • local subnet: enter the local subnet ...

  • Page 7

    D-link technical support – how to setup an ipsec vpn connection between a dir-130 and di-80xhv page 7 of 10 step 4: click on select ike proposal and configure as followed: • proposal name: enter a name for the proposal id number 1 • dh group: group 2 • encrypt algorithm: 3des • authentication algori...

  • Page 8

    D-link technical support – how to setup an ipsec vpn connection between a dir-130 and di-80xhv page 8 of 10 step 5: click on select ipsec proposal and configure as followed: • proposal name: enter a name for proposal id number 1 • dh group: group 2 • encapsulation protocol: esp • encryption algorith...

  • Page 9

    D-link technical support – how to setup an ipsec vpn connection between a dir-130 and di-80xhv page 9 of 10 step 6: click on the status tab and select the vpn status button. The vpn should be established. If the tunnel has not been established, click on the refresh button or ping to an ip address on...

  • Page 10

    D-link technical support – how to setup an ipsec vpn connection between a dir-130 and di-80xhv page 10 of 10 connecting to shared resources via vpn to connect to shared resources via vpn you can map remote computers’ drives and folders by opening windows explorer and going to tools > map network dri...