D-Link DIR-130 - Broadband VPN Router How To Set Up - page 3
Other manuals for DIR-130 - Broadband VPN Router:
Specifications, Configuration, User Manual, Application Note
Manual is about: 8-port VPN Router
of
10
D-Link Technical
Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV
Page
3 of 10
Step 3: Configure the IPSec VPN as followed:
IPSEC SETTING
•
Enable: check box to enable
•
Name: enter a name for the VPN
•
Encapsulation Mode:: Tunnel
•
Remote IP: select Site to Site and enter the remote gateway
•
Remote Local LAN Net /Mask: enter the remote network and remote subnet mask
Authentication: enter a Pre-shared Key (Pre-share key must match remote side)
PHASE 1
•
IKE Proposal List: leave at default (3DES, SHA1)
PHASE 2
•
IPSec Proposal List: leave at default (3DES, SHA1)
Click
Save Settings.