D-Link DIR-130 - Broadband VPN Router Configuration - page 2
D-Link Technical Support – DS-60x VPN to DIR-130
Page
2 of 13
Step 3: Configure the IPSec VPN as followed:
•
Enable: check box to enable
•
Name: enter a name for the VPN
•
Local Net/Mask: enter the local network and subnet mask
•
Remote IP: select Remote User
•
Authentication: enter your desired Pre-shared Key
•
Local ID: leave as Default
•
Remote ID: leave as Default
•
•
Phase 1 Main Mode: selected
•
NAT-T Enable: untick the box
•
Keep Alive/ DPD: select none
•
DH Group: select 2-modp 1024-bit
•
IKE Proposal List:
•
Cipher #1: select 3DES
•
Hash: #1: select SHA
•
IKE Lifetime: enter 28800 (default)
•
•
Phase 2:
•
PFS Enable: tick the box (default)
•
PFS DH Group: select 2-modp 1024-bit
•
IPSec Proposal List:
•
Cipher #1: select 3DES
•
Hash #1: select SHA1
•
IPSec Lifetime: enter 3600 (default)
•
Click Save Settings then Continue