D-Link DIR-330 - Wireless G VPN Router Quick Install Manual - page 9
D-Link DIR-330 Quick Install Guide
If you selected Dynamic, you may need to enter the MAC address of the
computer that was last connected directly to your modem. If you are currently
using that computer, click
Clone Your PC’s MAC Address
and then click
Next
to continue.
The Host Name is optional but may
be required by some ISPs. The default
host name is the device name of the
Router and may be changed.
If you selected PPPoE, enter your PPPoE username and password. Click
Next
to continue. Select
Static
if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses.
Note:
Make sure to remove your PPPoE
software from your computer. The software
is no longer needed and will not work
through a router.
Click
Next
Click
Next
If you selected PPTP, enter your PPTP settings supplied by your ISP and
your PPTP username and password. Click
Next
to continue.
Click
Next