Dsl-504t ©2004 d-link systems, inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. Dsl-504t.12062004 if any of the above items are missing, please contact your reseller. Before you b...
2 hardware overview front panel lan ports: a solid light indicates a connection on the associated port. A blinking light indicates activity on the associated port. Status led: a blinking light indicates normal operation. If this light is not lit and the power light is on, this indicates failure. Pow...
3 rear panel hardware overview (continued) adsl port: connects to your telephone jack using a standard telephone cord. Lan ports: your computers connect here using standard ethernet cables. Reset button: resets the dsl-504t to the factory default settings. Hold for seven seconds for the unit to fact...
4 hardware installation step a step b step a step c please see the following page for an explanation of steps a-c, shown above..
5 hardware installation (continued) connect the telephone cord from your phone jack to the adsl port on the dsl-504t. Connect an ethernet cable from your computer to a lan port on the dsl-504t. Connect the power adapter to the power connector on the dsl-504t and the other end to a known good power s...
6 admin is the default user name and password. Type admin into the user name and password fields. Click ok type http://192.168.1.1 into the url address box and press the enter or return key. Using the setup wizard click run wizard launch your web browser (a shortcut is typically found on your deskto...
7 using the setup wizard (continued) click next this screen allows you to enter a new password for the admin account. This password is used to log into the web-based management interface. Select your time zone click next click next step e step f step g.
8 you will need to select the internet connection type. If you are unsure which type of internet connection you have, please contact your internet service provider. There are four connection modes and settings vary depending on the connection type. 1. Dynamic ip address - see dynamic ip address on p...
9 using the setup wizard (continued) static ip address click next pppoe/pppoa click next the dsl-504t defaults to the most commonly used values in the united states. The ip address information on the right is only shown as an example of the format that you will use. The dsl-504t defaults to the most...
10 click restart configuration is complete! Type in a url such as www.Dlink.Com to test your connection. Bridge mode click next using the setup wizard (continued) step h4 step i step j.
11 step h4 - bridged mode vpi:_____ vci:_____ connection type: 1483 bridged ip llc 1483 bridged ip vc-mux step h1 - dynamic ip address vpi:_____ vci:_____ connection type: 1483 bridged ip llc 1483 bridged ip vc-mux step h2 - static ip address vpi:_____ vci:_____ ip address: ____.____.____.____ subne...
T tt ttechni echni echni echni echnical support cal support cal support cal support cal support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warranty...
