1. DL manuals
  2. D-Link
  3. IP Phone
  4. DVG-5121SP
  5. User Manual

D-Link DVG-5121SP User Manual

Summary of DVG-5121SP

  • Page 1

    Dvg-5121sp voip telephone adapter user’s manual version 1.1 august 28, 2007.

  • Page 2

    Dvg-5121sp user’s manual d-link corporation 2 1. Introduction 1-1. Product overview..…..................................................................................................5 1-2. Product features……………………………..……………….……………………………6 1-3. Hardware description……………………………………………………………………...8 2. B...

  • Page 3

    Dvg-5121sp user’s manual d-link corporation 3 5-2. Route static route………………………………………………………………………………….….37 5-3. Security 5-3-1. Mac filter………………………………………………………………………………..38 5-3-2. Ip filter…………………………………………………………………………………..39 5-3-3. Url filter………………………………………………………………………………..40 5-3-4. Domain filter…………...

  • Page 4

    Dvg-5121sp user’s manual d-link corporation 4 9. Status 9-1. Device information………………………………………………………………………..76 9-2. Log………………………………………………………………………………………….77 9-3. Ip tables log…………………………..………………………………………………….78 9-4. Line status…………………………………………………………………………………79 9-5. Cdr……………………………………………………………………………………...

  • Page 5: 1. Introduction

    Dvg-5121sp user’s manual d-link corporation 5 1. Introduction 1-1. Product overview d-link®, an industry leader in networking, introduces the dvg-5121sp voip telephone adapter for the home environment. The dvg-5121sp voip telephone adapter converts any existing analog telephone (corded or cordless) ...

  • Page 6

    Dvg-5121sp user’s manual d-link corporation 6 1-2. Product features wan: one rj-45 10/100mbps auto-mdi/mdix ethernet port wan types: static ip, pppoe, dhcp, pptp, bigpond, l2tp vpn pass through qos: ip precedence, diffserv nat traversal: outbound proxy, stun, upnp sip and rtp priority queuing rtp pa...

  • Page 7

    Dvg-5121sp user’s manual d-link corporation 7 voice pond key sipv2 compliance sip methods: ack, bye, cancel, info, invite, notify, options, ping, prack, refer, register, subscribe, update sip extension: session timer, proxy-require, p-asserted, mwi voice compression: g.711 a/u-law, g.726, g.729a/b, ...

  • Page 8

    Dvg-5121sp user’s manual d-link corporation 8 1-3. Diagnostic leds and external interfaces front panel power led when this led is on, the dvg-5121sp is powered on. Provision led the provision led flashes during access to the tr-069 provision acs and turns off after provision process finished. Lan le...

  • Page 9

    Dvg-5121sp user’s manual d-link corporation 9 rear panel side panel rj11 pstn life line phone port this port connects to the wall phone line using an rj-11 phone cable. Phone ports x2 each of these ports connects to an analog phone using an rj-11 phone cable. Reset button use a paper clip or the tip...

  • Page 10: 2. Before You Begin

    Dvg-5121sp user’s manual d-link corporation 10 2. Before you begin 2-1. Package contents dvg-5121sp voip telephone adapter one cat5 ethernet cable cd-rom one standard rj-11 phone cable quick installation guide 12vdc 1.25a power adapter if any of the above items are missing, please contact your resel...

  • Page 11

    Dvg-5121sp user’s manual d-link corporation 11 3. Installation and applications 3-1. Voip telephone adapter assigned with a public ip address the voip telephone adapter will have a public ip address for internet connection regardless of whether it is a static ip address, dhcp (using a cable modem), ...

  • Page 12

    Dvg-5121sp user’s manual d-link corporation 12 3-2. Voip telephone adapter in a nat network the voip telephone adapter uses a virtual ip address and the ip sharing function of other systems to connect to the internet. Setting action lan ip address of ip sharing please avoid using the ip addresses 19...

  • Page 13

    Dvg-5121sp user’s manual d-link corporation 13 3-3. Telephone interface description connecting the dvg-5121sp to the phone sets after connecting telephone sets to the phone 1 and phone 2 fxs ports, each set acts as an independent ip line that is provided by the applied sip server. Connecting the dvg...

  • Page 14

    Dvg-5121sp user’s manual d-link corporation 14 3-4. Accessing the web-based configuration utility instructions step 1: open an internet browser. Step 2: enter voip telephone adapter’s wan port ip address in the website address field. If the pc is connected to the lan port, enter the lan port ip addr...

  • Page 15: 4. Basic Network Settings

    Dvg-5121sp user’s manual d-link corporation 15 4. Basic network settings 4-1. Wan the basic network settings are used to configure the voip telephone adapter’s communication ports, ip configurations, adsl service setting, ip tunneling, etc. Refer to the following pages for an explanation of the diff...

  • Page 16

    Dvg-5121sp user’s manual d-link corporation 16 host name: the host name is optional but may be required by some isps. The default host name is the device name of the voip telephone adapter and may be changed. Wan port mac: the default mac address is set to the wan’s physical interface mac address on...

  • Page 17

    Dvg-5121sp user’s manual d-link corporation 17 4-1-2. Dhcp dhcp (dynamic host configuration protocol) enables individual computers on an ip network to extract their configurations from a server (the dhcp server) or servers, in particular, servers that have no exact information about the individual c...

  • Page 18

    Dvg-5121sp user’s manual d-link corporation 18 wan port mac: the default mac address is set to the wan’s physical interface mac address on the voip telephone adapter. It is not recommended that you change the default mac address unless required by your isp. You can use the clone mac address button t...

  • Page 19

    Dvg-5121sp user’s manual d-link corporation 19 4-1-3. Pppoe (dsl) pppoe (point-to-point protocol over ethernet) is a proposal specifying how a host personal computer (pc) interacts with a broadband modem to achieve access to the growing number of high-speed data networks. Relying on two widely accep...

  • Page 20

    Dvg-5121sp user’s manual d-link corporation 20 wan port mac: the default mac address is set to the wan’s physical interface mac address on the voip telephone adapter. It is not recommended that you change the default mac address unless required by your isp. You can use the clone mac address button t...

  • Page 21

    Dvg-5121sp user’s manual d-link corporation 21 4-1-4. Pptp pptp (point-to-point tunneling protocol) was developed by a consortium including microsoft and is used for establishing vpn (virtual private network) tunnels across the internet. This allows remote users to securely and inexpensively access ...

  • Page 22

    Dvg-5121sp user’s manual d-link corporation 22 wan port mac: the default mac address is set to the wan’s physical interface mac address on the voip telephone adapter. It is not recommended that you change the default mac address unless required by your isp. Select manual setting to manually change t...

  • Page 23

    Dvg-5121sp user’s manual d-link corporation 23 4-1-5. L2tp l2tp (layer two tunneling protocol) is an extension of the point-to-point tunneling protocol (pptp) used by an internet service provider (isp) to enable the operation of a virtual private network (vpn) over the internet. Wan port ip assignme...

  • Page 24

    Dvg-5121sp user’s manual d-link corporation 24 ping from wan: while enabled, this allows pings from the wan through the internet to check if the device is working or not. Mtu: you may need to change the mtu (maximum transmission unit) for optimal performance with your specific isp. 1400 bytes is the...

  • Page 25

    Dvg-5121sp user’s manual d-link corporation 25 4-1-6. Bigpond this service is supported in australia only. Wan port ip assignment: selectbigpond. Basic network setting > wan > bigpond host name: the host name is optional but may be required by some isps. The default host name is the device name of t...

  • Page 26

    Dvg-5121sp user’s manual d-link corporation 26 ping from wan: while enabled, this allows pings from the wan through the internet to check if the device is working or not. Bigpond account: enter your bigpond user name. Bigpond password: enter your bigpond password and then retype the password in the ...

  • Page 27

    Dvg-5121sp user’s manual d-link corporation 27 4-2. Lan lan setting this section will allow you to change the local network settings of the telephone adapter and configure the dhcp settings. Basic network setting > lan lan ip address: enter the lan ip address of the telephone adapter. The default ip...

  • Page 28

    Dvg-5121sp user’s manual d-link corporation 28 4-3. Dhcp server basic network setting > dhcp server 4-3-1. Dhcp server setting the dvg-5121sp has a built-in dhcp (dynamic host control protocol) server. The dhcp server will automatically assign an ip address to the computers on the lan/ private netwo...

  • Page 29

    Dvg-5121sp user’s manual d-link corporation 29 dhcp server: select enable or disable. The default setting is enable. Assigned dhcp ip address: set the starting ip address and the ending ip address for the dhcp server’s ip assignment. Dhcp ip lease time: the length of time for the ip lease. Select th...

  • Page 30

    Dvg-5121sp user’s manual d-link corporation 30 u 5. Advanced network settings 5-1. Nat 5-1-1. Nat setting advanced network setting > nat > nat setting nat settings: you can choose what kinds of nat need to be supported in this page. Masquerade: ip masquerading allows one or more workstations on a la...

  • Page 31

    Dvg-5121sp user’s manual d-link corporation 31 ipsec pass through: ipsec is a framework for a set of protocols for security at the network or packet processing layer of network communication. Enable or disable this framework verification. Pptp pass through: pptp is a protocol that allows corporation...

  • Page 32

    Dvg-5121sp user’s manual d-link corporation 32 5-1-2. Virtual server setting advanced network setting > nat > virtual server setting virtual server: select enable or disable. Private ip: enter the ip address ofthe server computer in the lan (local area network) that will be providing the virtual ser...

  • Page 33

    Dvg-5121sp user’s manual d-link corporation 33 schedule: the schedule of time when the virtual server will be enabled. The schedule may be set to always, which allows the particular server to always be enabled. If it is set to by schedule, select the time frame for the server to be enabled. Example:...

  • Page 34

    Dvg-5121sp user’s manual d-link corporation 34 5-1-3. Application setting some applications require multiple connections, such as internet gaming, video conferencing, internet telephony and others. These applications have difficulties working through nat (network address translation). Special applic...

  • Page 35

    Dvg-5121sp user’s manual d-link corporation 35 public port: this is the port number on the wan side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. Public type: this is the protocol used for the ...

  • Page 36

    Dvg-5121sp user’s manual d-link corporation 36 5-1-4. Upnp setting advanced network setting > nat > upnp upnp internet gateway device: select enable or disable. Upnp provides compatibility with networking equipment, software and peripherals of the over 400 vendors that cooperate in the plug and play...

  • Page 37

    Dvg-5121sp user’s manual d-link corporation 37 5-2. Route static route advanced network setting > route > static route if the wan setting uses a static ip address, then the nat ip address is set as the public ip address for ip sharing. Static route: select enable or disable. Type: select net or host...

  • Page 38

    Dvg-5121sp user’s manual d-link corporation 38 5-3. Security 5-3-1. Mac filter advanced network setting > security > mac filter use mac (media access control) filters to allow or deny lan (local area network) computers by their mac addresses from accessing the network. Mac filter: select enable or d...

  • Page 39

    Dvg-5121sp user’s manual d-link corporation 39 5-3-2. Ip filter advanced network setting > security > ip filter ip filter: use ip filters to deny lan ip addresses from accessing the internet. You can deny specific port numbers or all ports for the specific ip address. Select enable or disable. Activ...

  • Page 40

    Dvg-5121sp user’s manual d-link corporation 40 5-3-3. Url filter advanced network setting > security > url filter url filter: select enable or disable. Active: select yes or no. Client ip: enter the ip address or a range of ip addresses. Url filter string: enter the url filter string. Log: select en...

  • Page 41

    Dvg-5121sp user’s manual d-link corporation 41 5-3-4. Domain filter advanced network security > security > domain filter domain filter: select enable or disable. Active: select yes or no. Client ip: enter the ip address or a range of ip addresses. Domain filter string: enter the url filter string. L...

  • Page 42

    Dvg-5121sp user’s manual d-link corporation 42 5-3-5. Firewall advanced network setting > security > firewall firewall: select enable or disable. Active: selectyes or no. Action: select allow or deny. Source: choose wan or lanas the sourceand enter a range of ip addresses on the internet that you wo...

  • Page 43

    Dvg-5121sp user’s manual d-link corporation 43 5-3-6. Rule summary this page contains a list of all the security settings rules..

  • Page 44: 6. Sip Setting

    Dvg-5121sp user’s manual d-link corporation 44 6. Sip setting 6-1. Basic setting sip setting > basic setting sip port number: this is also called an outbound proxy. The sip (session initiation protocol) port number handles sip call signaling as a standard sip proxy server. It receives and transmits ...

  • Page 45

    Dvg-5121sp user’s manual d-link corporation 45 session timer: this setting can help to avoid excessive billing due to a dropped call. Media port start: enter the beginning of the listening port range. Media port end: enter the end of the listening port range. Transport: select udp or tcp from the dr...

  • Page 46

    Dvg-5121sp user’s manual d-link corporation 46 6-2. Account setting sip setting > account setting authentication expired time: thetime for authentication expiration. Note! These settings are for advanced users only. Incorrect settings will cause the phone to work improperly. Contact your itsp for mo...

  • Page 47

    Dvg-5121sp user’s manual d-link corporation 47 6-3. Nat traversal sip setting > nat traversal nat traversal: select enable or disable. Traversal by: select stun or upnp.Use stun to prevent problems with setting the ip sharing function, but some nat do not support this protocol. Use upnp to enable th...

  • Page 48: 7. Voip Setting

    Dvg-5121sp user’s manual d-link corporation 48 7. Voip setting 7-1. Voice setting voip setting > voice setting packet length: select a packet length from the drop-down menu. G.726 32k payload type value: select the payload type value from the drop-down menu. Outband 2833 payload type value: select t...

  • Page 49

    Dvg-5121sp user’s manual d-link corporation 49 pstn switch mode: select auto mode or always pstn from the drop-down menu. Codec priorities: use this field to select the type of voice coder/decoder (codec) priority you want to use. G.711/ ulaw: operates at 64 kbps (standard), 56 kbps, and 48 kbps (no...

  • Page 50

    Dvg-5121sp user’s manual d-link corporation 50 7-2. Call service voip setting > call service call waiting: select enable or disable. Call waiting timeout- the waiting timeout can be set if the call waiting function is enabled. Call hunting group: select enabled or disabled. Call repeat timeout: sele...

  • Page 51

    Dvg-5121sp user’s manual d-link corporation 51 call forward always uri: enter the forward always number for the automatic dialing function. Call forward on busy uri: enter theforward on busy number for the automatic dialing function. Call forward on noanswer uri: enter the forward on no answer numbe...

  • Page 52

    Dvg-5121sp user’s manual d-link corporation 52 7-3. Phone setting voip setting > phone setting tone setting: select the tone setting for your local area. Caller id type: select fsk type. In most cases, bellcore is preferred in north america and etsi in europe. Note: if you register the voip telephon...

  • Page 53

    Dvg-5121sp user’s manual d-link corporation 53 caller id type 1 alerting signal: select the alerting signal type for when the phone is on-hook. Dtas: dual tone alert signal rpas: ring pulse alert signal lr: line reversal lr-dtas: line reversal and dual tone alert singal caller id type 2 alerting sig...

  • Page 54

    Dvg-5121sp user’s manual d-link corporation 54 7-4. E.164 setting voip setting > e.164 setting e.164 enable: select enable or disable. Country code: enter the country code. Area code: enter the area code. Note: it depends on the proxy if you want to invite the proxy to follow the e.164 rule. If you ...

  • Page 55

    Dvg-5121sp user’s manual d-link corporation 55 7-5. Fax setting voip setting > fax setting t.38 option: select on of the following options from the drop-down menu: voice: voice data t.38 fax relay: integrated and tested with fax data modems at rates of up to 14.4 kbps. Udp and tcp support. Voice and...

  • Page 56

    Dvg-5121sp user’s manual d-link corporation 56 7-6. General dialing setting voip setting > general dialing setting > b type inter-digit timeout: if no other number is being dialed within this interval, the telephony ata will terminate this call. First-digit timeout: if the phone is picked up and no ...

  • Page 57

    Dvg-5121sp user’s manual d-link corporation 57 b type (default) setting call hold: push the phone set flash hook one time to enable this function while holding a call. Note: the flash hook pushing time can’t be longer than 1/2 second. Three way conference: set up a call, then push the phone set flas...

  • Page 58

    Dvg-5121sp user’s manual d-link corporation 58 a type setting voip setting > general dialing setting > a type call hold: push the phone set flash hook one time to enable this function while holding a call. Note: the flash hook pushing time can’t be longer than 1/2 second. Transfer code: default *# n...

  • Page 59

    Dvg-5121sp user’s manual d-link corporation 59 forward noanswer active code: default *92 forward noanswer deactive code: default *93 do not disturb active code: default *78 do not disturb deactive code: default *79 call return code: default *69 anonymous call/block caller id (per call) code: default...

  • Page 60

    Dvg-5121sp user’s manual d-link corporation 60 digit map setting voip setting > general dialing setting > digit map setting the voip digit map allows voip calls with leading digits and length matching the rules specified to be dialed out immediately. It is a phone dialing plan thatdefines specific p...

  • Page 61

    Dvg-5121sp user’s manual d-link corporation 61 individual keys: 0, 1…. 9, *, and # timer: the letter “x” which matches any numeric digit (0 to 9). Range: one or more keys enclosed between square brackets ( “[“ and “]”). Sub-range: two numeric digits separated by a hyphen (“-”) which matches any digi...

  • Page 62

    Dvg-5121sp user’s manual d-link corporation 62 7-7. Qos/tos setting tos voip setting > qos/tos setting > tos network traffic can be classified by setting the tos (type of service) values at the data source so a server can decide the best method of delivery (least cost, fastest route, etc.). Sip tos:...

  • Page 63

    Dvg-5121sp user’s manual d-link corporation 63 diffserv voip setting > qos/tos setting > diffserv diffserv is a class of service (cos) model that marks packets so that they receive specific per-hop treatment. In addition, applications do not have to request a particular service or give advanced noti...

  • Page 64

    Dvg-5121sp user’s manual d-link corporation 64 qos priority setting voip setting > qos/tos setting > qos priority setting quality of service (qos) refers to a network’s ability to deliver data with minimum delay and the networking method used to provide bandwidth for real-time multimedia application...

  • Page 65

    Dvg-5121sp user’s manual d-link corporation 65 7-8. Phone book voip setting > phone book up to 50 phone numbers can be stored in the phone book. Speeddial digit provides shortcuts (#0 to #9) for dialing frequently used voip phones..

  • Page 66

    Dvg-5121sp user’s manual d-link corporation 66 7-9. Call screen voip setting > call screen use the call screen page to enter phone numbers you want to reject. Incoming calls and outgoing calls can be rejected. Enter the phone number, click the submit button, and the phone number that was just entere...

  • Page 67: 8. Tools

    Dvg-5121sp user’s manual d-link corporation 67 8. Tools 8-1. Admin tools > admin account level: select admin, user, or guest for the account level. Account name: enter the account name. Account password: enter the password to be used for authentication. Confirm password: reenter the password to be u...

  • Page 68

    Dvg-5121sp user’s manual d-link corporation 68 8-2. Page configure tools > page configure web page authority setting: choose one of the pages from the web page authority list to change the view level and configure level as admin, user, guest, or non authority..

  • Page 69

    Dvg-5121sp user’s manual d-link corporation 69 8-3. Day/time tools > day / time > manual time setting manual time setting: select manual time setting to manually input the time by entering the values for the year, month, day, hour, minute, and second. Click the computer clock button to copy your com...

  • Page 70

    Dvg-5121sp user’s manual d-link corporation 70 daylight saving settings tools > day / time > ntp time server enable daylight saving: check the box to enable the daylight saving function. Select the dst start and end time from the drop-down menus. Please refer to the dst setting area and duration bel...

  • Page 71

    Dvg-5121sp user’s manual d-link corporation 71 8-4. Ddns tools > ddns ddns (dynamic domain name system) is a method of keeping a domain name linked to a changing ip address. This is a useful feature since many computers do not use a static ip addresses. Ddns: select enable or disable. Ddns server ty...

  • Page 72

    Dvg-5121sp user’s manual d-link corporation 72 8-5. System tools > system ping test: enter the host name or an ip address then click the ping button. Save/ restore setting: click the save button to save the current settings to the local hard drive. To restore previously saved settings, click the bro...

  • Page 73

    Dvg-5121sp user’s manual d-link corporation 73 8-6. Firmware tools > firmware you can upgrade the firmware of the voip telephone adapter here. Make sure the firmware you want to use is on the local hard drive of the computer. Please check the d-link support site for firmware updates at http://suppor...

  • Page 74

    Dvg-5121sp user’s manual d-link corporation 74 8-7. Device setting tools > device setting device mode: select router or bridge mode from the drop-down menu. Bridge/lan ip: enter the bridge/lan ip address. Subnet mask: enter the subnet mask..

  • Page 75

    Dvg-5121sp user’s manual d-link corporation 75 8-8. Tr-069 setting (only for tr-069 firmware version) tools > device setting > tr-069 setting tr-069 is a cpe wan management protocol and it provides the communication between cpes and acs. It includes both a safe auto configuration and the control of ...

  • Page 76: 9. Status

    Dvg-5121sp user’s manual d-link corporation 76 9. Status 9-1. Device information status > device info this page displays the current device information for the dvg-5121sp..

  • Page 77

    Dvg-5121sp user’s manual d-link corporation 77 9-2. System log status > log the voip telephone adapter keeps a running log of events and activities occurring on the device. If the device is rebooted, the logs are automatically cleared..

  • Page 78

    Dvg-5121sp user’s manual d-link corporation 78 9-3. Ip tables log status > iptables log this page shows the mac filter, ip filter, url filter, domain filter, and firewall information..

  • Page 79

    Dvg-5121sp user’s manual d-link corporation 79 9-4. Line status status > state this page displays the current information for the line status and the rtp packet summary..

  • Page 80

    Dvg-5121sp user’s manual d-link corporation 80 9-5. Cdr status > cdr the cdr (call detail record) contains information about recent system usage, including the identities of sources (points of origin), the identities of destinations (endpoints), the duration of each call, the amount billed for each ...

  • Page 81: 10. Telnet

    Dvg-5121sp user’s manual d-link corporation 81 10. Telnet run telnet: in windows, go to the start menu and select run. Enter “telnet 192.168.1.1” in the box. When you want to use the telnet interface to change the settings, it’s necessary to totally log out from the web page control because the serv...