- DL manuals
- D-Link
- Wireless Router
- DVG-N5402SP
- User Manual
D-Link DVG-N5402SP User Manual - 3-2 Advanced
DVG-N5402SP User’s Manual MAINTENANCE
D-Link Systems, Inc. 14
3-2 ADVANCED
3-2-1 Parental Control
3-2-1-1 MAC Filtering
Use MAC Filters to deny computers within the local area network from accessing the Internet. You can
either manually add a MAC address that are connected to the VoIP Router.
ADVANCED
→
Parental Control
→
MAC Filtering
Configure Block MAC Address:
Disable Block MAC Address – Unable the MAC Filtering
Enable Block MAC, allow following PC to access network – MAC Address that include in the list will be able to connect to the
network.
Enable Block MAC, deny following PC to access network – MAC Address that include in the list will not be able to connect to
the network.
MAC Address: Enter the MAC of the computer in the LAN (Local Area Network) to be used in the MAC
filtering list.
DHCP client list: Get the MAC address from computer that’s listed in the LAN client list.
Schedule: Select a rule in the drop down list. Rules in the list can be configured in Advanced -> Schedules.
Click the Schedules button to go to the page.
Summary of DVG-N5402SP
Page 1
Dvg-n5402sp voip wireless router user’s manual version 1.4 (30 march 2011).
Page 2
© 2010 d-link corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of d-link corporation is strictly forbidden. Trademarks used in this text: d-link and the d-link logo are trademarks of d-link corporation/d-link systems inc.; other trademarks and tr...
Page 3: Contents
D-link systems, inc. Contents 1. Introduction .......................................................................................................................................................... 1 1-1 product overview ...............................................................................
Page 4: 1. Introduction
Dvg-n5402sp user’s manual product overview d-link systems, inc. 1 1. Introduction 1-1 product overview the dvg-n5402sp is designed to carry both voice and facsimile over the ip network and wirelessly share internet access. It uses the industry standard sip call control protocol so as to be compatibl...
Page 5: 1-2 Hardware Description
Dvg-n5402sp user’s manual hardware description d-link systems, inc. 2 1-2 hardware description front panel power: a steady green light indicates a proper connection to a power source. A red light indicates the power-on self test fails or the device is malfunction. Prov/alm: a blinking light indicate...
Page 6
Dvg-n5402sp user’s manual hardware description d-link systems, inc. 3 rear panel 1. Antenna: connect to a wireless network. 2. Line: connect to the telephone line on the wall jack through a telephone cable. 3. Phone2/phone1: connect to your phones through a standard telephone cable. 4. Usb: usb host...
Page 7: 2. Getting Started
Dvg-n5402sp user’s manual setup d-link systems, inc. 4 2. Getting started to access the web-based configuration utility, open a web browser such as ie (internet explorer) and enter the ip address of the dvg-n5402sp from lan port. The default username and password of user account: admin/password . Op...
Page 8: 3-1 Setup
Dvg-n5402sp user’s manual setup d-link systems, inc. 5 3. Voip router web configuration (continued) 3-1 setup 3-1-1 wireless setup this section instructs you how to setup your wireless network on the voip router device. Setup hint: 1. Every device in the same wireless network must use the same ssid....
Page 9
Dvg-n5402sp user’s manual setup d-link systems, inc. 6 wireless network name (ssid): ssid is the name of your wireless network. All wireless-equipped devices share the same ssid to communicate with each other. It must be unique to identify separated wireless network. For security, you should change ...
Page 10
Dvg-n5402sp user’s manual setup d-link systems, inc. 7 3-1-1-2 wireless security this section introduces you different ways of wireless security you can set up. It is important to enable secure algorithm to protect your data from eavesdropping by unauthorized wireless users. Setup → wireless setup →...
Page 11
Dvg-n5402sp user’s manual setup d-link systems, inc. 8 setup → wireless setup → wireless security (wep) wep key length: select 64-bit or 128-bit data encryption. Default tx key: you can select one of the keys as active key at a time. Wep key format: select the preferred wep key format according to w...
Page 12
Dvg-n5402sp user’s manual setup d-link systems, inc. 9 wpa authentication mode the wireless network can use wpa authentication to verify whether a wireless device is allowed to access your access point or not. You can choose to use enterprise (radius) method or personal (pre-shared key). The encrypt...
Page 13
Dvg-n5402sp user’s manual setup d-link systems, inc. 10 setup → wireless settings → wireless security (wpa-enterprise) if wpa security mode is set to wpa (wpa only, wpa2 only, or wpa2 mixed), you can set wpa mode to wpa-enterprise (wpa- enterprise, wpa2- enterprise, wpa2 mixed- enterprise), select t...
Page 14
Dvg-n5402sp user’s manual setup d-link systems, inc. 11 3-1-1-3 wps setup → wireless setup → wps wireless ssid: select the vap (virtual access point) of which the wps function is enabled. Note: there is only one vap of which the wps function is enabled each time. If the wps function of the vap has b...
Page 15
Dvg-n5402sp user’s manual setup d-link systems, inc. 12 3-1-2 lan setup setup → lan setup router ip address: enter the lan ip address of the voip router. It is also the default gateway for dhcp clients. Subnet mask: enter the subnet mask for dhcp clients..
Page 16
Dvg-n5402sp user’s manual setup d-link systems, inc. 13 setup → lan setup enable dhcp server: this variable is to assign the ip address for the devices connected to lan port of the voip router. Ip pool starting address: enter the starting ip address for the dhcp server's ip assignment. Ip pool endin...
Page 17: 3-2 Advanced
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 14 3-2 advanced 3-2-1 parental control 3-2-1-1 mac filtering use mac filters to deny computers within the local area network from accessing the internet. You can either manually add a mac address that are connected to the voip router. Advanc...
Page 18
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 15 3-2-1-2 ip filtering use ip filters to deny particular lan ip addresses from accessing the internet. You can deny specific port numbers or all ports for a specific ip address. The screen will display well-known ports that are defined. To ...
Page 19
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 16 3-2-1-3 port filtering port filtering enables you to control all data that can be transmitted over routers. When the port used at the source end is within the defined scope, it will be filtered without transmission. Advanced → parental co...
Page 20
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 17 3-2-1-4 url filtering url filtering is used to block websites (for example, www.Yahoo.Com ). Advanced → parental control → url filtering enable url filtering: enable or disable the url function. Url black filtering: users unable to access...
Page 21
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 18 3-2-1-5 dhcp filtering dhcp filtering is used to control network access based on the ip address of the network device. It is used to deny network or internet access. Advanced → parental control → dhcp filtering enable dhcp filter: enable ...
Page 22: 3-2-2 Firewall And Dmz
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 19 advanced → firewall and dmz → dhcp filtering black list: if the mac address of the device on the lan, the voip router does not assign the ip address. Mac: enter the mac address of the device on the lan. 3-2-2 firewall and dmz 3-2-2-1 dmz ...
Page 23
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 20 enable dmz: check the box to enable dmz feature. Wan connection: select the wan port that enables dmz from the drop-down list. Users can access the dmz host that is provided by this wan connection through internet access. Dmz host ip addr...
Page 24
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 21 3-2-2-3 virtual server enable users on internet to access the www, ftp and other services from your nat. It is also known as port forwarding. When remote users are accessing web or ftp servers through wan ip address, it will be routed to ...
Page 25: 3-2-3 Advanced Wireless
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 22 3-2-3 advanced wireless 3-2-3-1 advanced this section introduces advanced configuration of the wireless access point. If you are not familiar with the following functions, keep the default parameters. In some cases, incorrect settings may...
Page 26
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 23 provides good network performance. In most case, it is recommended to keep the default value: 2346. Preamble type: it defines the length of the preamble which sends out with a packet format. Specify an appropriate preamble type for your n...
Page 27: 3-2-4 Advanced Network
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 24 3-2-4 advanced network 3-2-4-1 alg alg (application layer gateway) is also named the third generation firewall. When the user on the trusted network wants to connect to the untrusted network (internet), the application will be guided to t...
Page 28
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 25 3-2-4-2 qos lan qos advanced → advanced network → qos enable lan qos: check the box to enable lan qos by hardware. Priority: use the drop-down menu to select low or high for the voip router to deliver the packets from lan interface when t...
Page 29
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 26 3-2-4-3 static routing build static routes within an internal network. These routes will not apply to the internet. Advanced → advanced network → static routing destination network address: the destination ip address of the router. Subnet...
Page 30
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 27 3-2-4-4 upnp advanced → advanced network → upnp enable upnp: check the box to enable the ip traffic of the voip router to pass through an internet sharing device..
Page 31: 3-2-5 Schedule
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 28 3-2-5 schedule to access the schedules window, click the schedules button in the advanced directory. You can add schedules in this page and then apply them to parental control. Name: enter a name for the schedule. Day(s): use the radio bu...
Page 32: 3-3 Maintenance
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 29 3-3 maintenance 3-3-1 device management maintenance → device management note: logging in as user, you can only access to some specific settings of the voip router. Current password: enter the password for accessing the voip router. New pa...
Page 33: 3-3-2 Backup And Restore
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 30 3-3-2 backup and restore reboot maintenance → backup and restore → reboot reboot: click the reboot button to reboot the system. Backup setting the current system settings can be saved as a file onto the local hard drive. Maintenance → bac...
Page 34
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 31 update setting maintenance → backup and restore → update setting to restore the system settings file, click the browse button to search the local hard drive for the file to be used. Once you locate the file, click the upload setting butto...
Page 35: 3-3-3 Dynamic Dns
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 32 3-3-3 dynamic dns advanced → dynamic dns enable dynamic dns: check the box to enable ddns (dynamic domain name server) function. It is only necessary when the voip router is set up behind an internet sharing device that uses a dynamic ip ...
Page 36
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 33 password or key: enter the password for logging into the ddns server. Verify password or key: enter the password again for confirmation. 3-3-4 usb file sharing over ftp maintenance → usb file sharing over ftp enabled ftp server : select t...
Page 37: 3-3-5 Diagnostics
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 34 3-3-5 diagnostics 3-3-5-1 ping in this page, you can use ping to verify whether a remote peer is reachable. Maintenance → diagnostics → ping ping destination: enter the ip address or domain name for ping. Number of ping: enter the number ...
Page 38
Dvg-n5402sp user’s manual maintenance d-link systems, inc. 35 3-3-5-2 traceroute maintenance → diagnostics → traceroute host: enter the ip address or domain name for testing. Max ttl: set the survival time of the data packets during testing. Its range is in 1 to 128. Wait times: set the waiting time...
Page 39: 3-4 Status
Dvg-n5402sp user’s manual status d-link systems, inc. 36 3-4 status 3-4-1 device info status → device info for wan port information, it shows ip address, subnet mask, default gateway and domain name server. If you use pppoe to obtain ip, you will know if the ip is obtained through this method. If ip...
Page 40
Dvg-n5402sp user’s manual status d-link systems, inc. 37 for lan port information, it shows lan port ip, subnet mask, and the mac address. For hardware, it shows the hardware platform and driver version..
Page 41: 3-4-2 Voip Status
Dvg-n5402sp user’s manual status d-link systems, inc. 38 3-4-2 voip status status → voip status for port status, it includes if each port registers to proxy successfully, the last dialed number, how many calls each port has made since the voip router is start, etc..
Page 42: 3-4-3 Lan Client
Dvg-n5402sp user’s manual status d-link systems, inc. 39 3-4-3 lan client status → lan client the lan clients table displayed the local lan information. The active wireless clients table displayed the identification and transmission status of active wireless clients on wireless lan interface. The dh...
Page 43: 3-4-4 Statistics
Dvg-n5402sp user’s manual status d-link systems, inc. 40 3-4-4 statistics status → statistics it displays the information of the last call made. Press refresh button to get the latest rtp packet summary..
Page 44: 3-4-5 Logout
Dvg-n5402sp user’s manual status d-link systems, inc. 41 3-4-5 logout status → logout if setting or parameter has been changed, remember to save the changes before you logout the configuration menu..
Page 45: Appendix
Dvg-n5402sp user’s manual appendix d-link systems, inc. 42 appendix product features wan • one 10/100/1000mbps auto-negotiation, auto-crossover rj-45 ethernet port • support static ip, dhcp, pppoe, pptp, l2tp, 3g usb adapter, and bridge. • qos: ip tos (type of services) and diffserv (differentiated ...
Page 46
Dvg-n5402sp user’s manual appendix d-link systems, inc. 43 o ivr o telnet • status reports: o port status o registration status o ping tests o hardware / software information • firmware upgrade through local, tftp, ftp, http, https server • configuration backup/restore • reset button (with restore f...