D-Link DW-290 User Manual - Windows Nt 4.0

6 

Windows NT 4.0 

Driver Installation and TCP/IP Setup 

Windows NT 4.0 does not support Plug-and-plug. Therefore, the D-Link NDIS 

driver installation uses an approach that is different from the installation used 

in other Operating Systems. In order to install D-Link DW-290 Wireless 

Network mini PCI Card in Windows NT 4.0 with Service Pack 6, a PC Card 

utility called CardWizard is used. If your computer system does not have 

CardWizard utility pre-loaded, then you can purchase it from SystemSoft 

Corporation (www.systemsoft.com) or you can download a 14-day evaluation 

copy from ftp://www.systemsoft.com/pub/Wn51tren.exe. Note that 

CardWizard requires Windows NT 4.0 Build 1381 (Service Pack 6) installed 

in order to function correctly. Please install Service Pack 6 if your Windows 

NT 4.0 is not updated. 

After CardWizard utility is loaded, insert the D-Link DW-290 Wireless 

Network mini PCI Card into a 32-bit CardBus slot, and follow these steps to 

install the NDIS driver: 

1.  CardWizard will detect the insertion of the D-Link CardBus card and show 

the following screen. Click Correct to continue.