D-Link DW-290 User Manual - System Requirements

System Requirements 

A computer that meets the following specifications: 

-Windows 2000,Windows ME, or Windows 98SE 

 PCI expansion slot 

 At least 64 MB of memory 

 A 300 MHz processor or higher 

At least one other IEEE 802.11a-compliant device 

Hardware Installation 

Follow these steps to install the 802.11a PCI Card in a computer’s PCI slot: 

1. 

Turn off your computer and unplug its power cord from the wall outlet for 

safety purposes. 

2. 

Remove the computer cover. 

3. 

Locate an unused PCI slot and refer to your PC ’s manual for 

instructions on how to remove the plate that covers the slot (if 

applicable). 

4. 

Align the Harmony 802.11a PCI Card over the empty slot. 

5. 

Firmly insert the card into the slot, as illustrated below. 

6. 

Secure the card’s metal bracket to the computer following the directions 

provided in your PC’s manual. 

7. 

Replace the computer cover. 

8. 

Plug the computer’s power cord back into the wall outlet. 

9. 

Place the antenna with the longer cable on top of your desk, computer, 

or monitor.