D-Link DW-290 User Manual - page 155

Channel Number 

Channel Frequency 

Regulator Domain 

82 

5.41 GHz 

N/A (not calibrated) 

84 

5.42 GHz 

N/A (not calibrated) 

86 

5.43 GHz 

N/A (not calibrated) 

5.  To select the fixed data rate at which you want the station to transmit, 

double-click on rateCtrlEnable from the same registry key location where 

clist resides, and enter 0 to disable rate adaptation. Double-click on 

TransmitRate and enter the value specified in the following table to select 

the actual data rate. For example, enter 3 for 18 Mbps.  

Rate Number 

Data Rate 

0 6 

Mbps 

1 9 

Mbps 

2 12 

Mbps 

3 18 

Mbps 

4 24 

Mbps 

5 36 

Mbps 

6 48 

Mbps 

7 54 

Mbps 

6.  For the changes to take effect: 

− 

If you are running Windows 98SE or Windows Me, close Register 

Editor and restart the systems.  

− 

If you are running Windows 2000 or Windows XP, unload and load 

the driver from LinkMon. 

7.  To undo these changes and go back to normal operation where the 

channel and data rate are dynamically set, change rateCtrlEnableto 1 

andclear the clist value.