Dwl-2100ap 802.11b/g access point command line interface reference manual first edition (january 2006) recyclable.
Table of contents using the cli .................................................................................................................................................................................................................................................................... 1 comma...
802.11 b/g access point command line interface manual 1 1 u sing the cli the dwl-2100ap can be accessed by telnet. Using microsoft windows operation system as example, open the command prompt on the computer that will be used for configuring and managing the ap and enter telnet and ip address of dwl...
802.11 b/g access point command line interface manual 2 press enter as there is no initial password. The following screen opens to indicates you have successfully logged into the dwl-2100ap. Commands are entered at the command prompt, d-link access point wlan1 ¡ >.
802.11 b/g access point command line interface manual 3 there are a number of helpful features included in the cli. Entering the ¡ ?¡ command and then pressing enter will display a list of all of the top-level commands. The same information can also be displayed by entering ¡ help¡ . Press enter to ...
802.11 b/g access point command line interface manual 4 this screen displays all the possible command completions for ¡ tftp¡ when you enter a command without a variable or value that needs to be specified, the cli will prompt you with further information about what is needed to complete the command...
802.11 b/g access point command line interface manual 5 2 c ommand s yntax the following symbols are used to describe how command entries are made and values and arguments are specified in this manual. The online help contained in the cli and available through the console interface uses the same syn...
802.11 b/g access point command line interface manual 6 : colon purpose separates two or more mutually exclusive items in a list, one of which must be entered. Syntax set antenna description in the above syntax example, you must specify either 1, 2 or best. Do not type the colon. Example command set...
802.11 b/g access point command line interface manual 7 3 u tility c ommands help command: function syntax help display cli command list help or ? Ping command: function syntax ping ping ping restart and exit commands: function syntax set factorydefault restore to default factory settings set factor...
802.11 b/g access point command line interface manual 8 4 e thernet c ommands get command: function syntax get hostipaddr display host ip address get hostipaddr get ipaddr display ip address get ipaddr get ipmask display ip network/subnet mask get ipmask get gateway display gateway ip address get ga...
802.11 b/g access point command line interface manual 9 5 w ireless c ommands fundamental config commands: function syntax config wlan select wlan adapter to configure. Dwl-2100ap only wlan 1 is available for configuration. This command is not necessary. Config wlan [0:1] find commands: find bss per...
802.11 b/g access point command line interface manual 10 get swpower display software power setting get swpower get superg display superg feature status of enabled or disabled get superg get wlanstate display wireless lan state status (enabled or disabled) get wlanstate get shortpreamble display sho...
802.11 b/g access point command line interface manual 11 set remoteap set remote ap's mac address set remoteap set autochannelselect set auto channel selection to enable or disable set autochannelselect [disable:enable] set rate set data rate set rate [best:1:2:5.5:6:9:11:12:18:24:36:48:54] set beac...
802.11 b/g access point command line interface manual 12 set multicastpacketcontrol enable or disable multicast packet control set multicastpacketcontrol [0:1] explanation: 0=disable:1=enable set maxmulticastpacketnumber set max multicast packet number set maxmulticastpacketnumber [0-256] security d...
802.11 b/g access point command line interface manual 13 wmm get command: function syntax get wmm display wmm mode status (enabled or disabled) get wmm get wmmparambss display wmm edca parameters used by sta in this bss get wmmparambss get wmmparam display wmm edca parameters used by this ap get wmm...
802.11 b/g access point command line interface manual 14 6 m ulti -ssid and vlan c ommands get command: function syntax get vlanstate display vlan state status (enabled or disabled) get vlanstate get nativevlan display native vlan tag get nativevlan get vlantag display vlan tag get vlantag get multi...
802.11 b/g access point command line interface manual 15 set multi-authentication set authentication type for multi-ssid set multi-authentication [open-system:shared-key:wpa:wpa-psk:wpa2:wpa2-psk:wpa-auto:w pa-auto-psk] [index] set multi-wmm set wmm mode set multi-wmm [disable:enable] set multi-ciph...
802.11 b/g access point command line interface manual 16 7 a ccess c ontrol l ist c ommands del command: function syntax del acl delete specified access control list entry del acl [1-16] del wdsacl delete specified wds acl entry: 1-8 del wdsacl [1-8] get command: function syntax get acl display acce...
802.11 b/g access point command line interface manual 17 8 r adius s erver c ommands get command: function syntax get radiusname display radius server name or ip address get radiusname get radiusport display radius port number get radiusport get radius2ndstate display the second radius mode get radi...
802.11 b/g access point command line interface manual 18 9 dhcp s erver c ommands command: function syntax dhcps help display dhcp server command help dhcps help dhcps state get dhcp server state dhcps state dhcps state turn on or turn off dhcp server dhcps state [on:off] dhcps dynamic info get curr...
802.11 b/g access point command line interface manual 19 10 s nmp c ommands command function syntax get snmp display snmp agent status get snmp set snmp set snmp agent state set snmp [disable:enable] snmp adduser add user to snmp agent snmp adduser [authprotocol] [authkey] [privprotocol] [privkey] e...
802.11 b/g access point command line interface manual 20 snmp editprivatecomm edit private communication string snmp editprivatecomm snmp addcomm add communication string snmp addcomm [type] explanation: communitystring: viewname: type:1: read-only, 2: read-write snmp delcomm delete community string...
802.11 b/g access point command line interface manual 21 11 t ime d isplay & sntp c ommands command: function syntax timeofday displays the current time of day timeofday note: need to set up sntp/ntp server firstly get command function syntax get sntpserver display sntp/ntp server ip address get snt...
802.11 b/g access point command line interface manual 22 12 t elnet & ssh c ommands tftp commands: command: function syntax tftp get get a file from tftp server. Tftp get filename tftp uploadtxt upload the configuration of the device to tftp server. Tftp uploadtxt filename tftp srvip setup the tftp ...
802.11 b/g access point command line interface manual 23 ssh setalgorithm set ssh algorithm ssh setalgorithm [0 -12] [enable/disable] explanation: algorithm: 0:3des 1:aes128 2:aes192 3:aes256 4:arcfour 5:blowfish 6:cast128 7:twofish128 8:twofish192 9:twofish256 10:md5 11:sha1 12:password) example: 1...
802.11 b/g access point command line interface manual 24 13 s ystem l og c ommand get command function syntax get syslog display syslog information get syslog set command function syntax set syslog set syslog setting set syslog remoteip set syslog remotestate [0:1] set syslog localstate [0:1] set sy...
802.11 b/g access point command line interface manual 25 14 f irst -t ime c onfiguration e xamples the following ap configuration examples are provided to help first-time users get started. The user commands are in bold for easy reference. Many users will want to set a new ip address for the dwl-210...
802.11 b/g access point command line interface manual 26 d-link access point wlan1 -> set authentication shared-key authentication type: shared-key d-link access point wlan1 -> set key 1 40 1234567890 shared key 1, size 40: 1234567890 d-link acc ess point wlan1 -> set key 1 default default key: 1 d-...
802.11 b/g access point command line interface manual 27 d-link access point wlan1 -> set authentication wpa authentication type: wpa d-link access point wlan1 -> set encryption enable encryption: enabled d-link access point wlan1 -> set cipher auto cipher selection: auto d-link access point wlan1 -...
