D-Link DWL-6600AP Quick Installation Manual - Lis
D-Link DWL-6600AP Quick Install Guide
5
E
N
G
LIS
H
Power on the access point
To power on the DWL-6600AP, you can use ONE of the following methods:
1. Connect the supplied power adapter, OR
2. Plug one end of your Ethernet cable into the LAN port of the DWL-6600AP, and
the other end into a port on a PoE switch.
Configure the access point
To set up and manage the DWL-6600AP, use one of the following methods:
1. Connect the access point and your computer directly via a straight-through
Ethernet cable. Manage the access point from the computer.
2. Connect the access point and your computer to the same switch or router. Manage
the access point from the computer.
3. Connect the access point to a Unified Wireless Switch or Wireless Controller.
Connect your computer to the same network as that of the Unified Wireless Switch
or Wireless Controller. Manage the access point from the computer via the Unified
Wireless Switch or Wireless Controller.
Computer
Switch or Router
DWL-6600AP
3. Installation
Computer
DWL-6600AP
Unified Wireless Switch
or
Wireless Controller
Computer
DWL-6600AP