1 air plus™ g 802.11g/2.4ghz wireless cardbus adapter dwl-g630 ©2003 d-link systems, inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. Dwl-g630.04232004 if any of the above items a...
2 shut down your computer click next click next click install drivers if the cd autorun function does not automatically start on your computer, type “d:\drivers\setup.Exe.” if it does start, proceed to the next screen. Click finish select no i will restart my computer later installing the drivers (c...
3 installing the dwl-g630 adapter in your computer a. Make sure to turn off the laptop computer. B. Locate thecardbusslot onyour laptop computer. C. Gently insert the dwl-g630 into the cardbus slot in your laptop computer (as shown.) link/activity led indicates that the dwl-g630 is properly installe...
4 restart your computer when you restart your computer this found new hardware wizard (windows xp) screen may appear: click next select install the software automatically (recommended) click finish to finalize the installation. For windows xp: this hardware installation alert screen will appear. Cli...
5 your installation is complete! After you’ve continued in windows xp, 2000, me, or 98se, the d-link airplus ™ g dwl-g630 configuration utility will automatically start and the utility icon will appear in the bottom right hand corner of the desktop screen (systray). If this icon appears green , then...
6 appendix a - using the air plus ™ g utility in windows xp uncheck use windows to configure my wireless network settings click ok click the xp networking icon to use the zero configuration wireless settings. Click advanced for windows xp, if you wish to use the airplus™ g utility, please do the fol...
7 appendix b - using the air plus ™ g utility • status: displays the mac address of the access point that is associated with the dwl-g630. • ssid: the service set identifier is the name assigned to the wireless network. The factory ssid setting is set to default. • txrate: the default setting is aut...
8 • ssid: the service set identifier is the name assigned to the wireless network. The factory ssid setting is set to default. Make changes here to match the ssid on existing wireless router or access point. • wireless mode: the factory setting is set to infrastructure. Ad-hoc mode is used for peer-...
9 appendix c - ip address configuration to connect to a network, make sure the proper network settings are configured for dwl-g630. For microsoft windows xp: go to start > right click on my network places > select properties > double-click on the network connection associated with the dwl-g630. Inpu...
10 for windows 2000 users: go to start > settings > network and dial-up connections > double-clickon the local area connection associated with the dwl-g630 > select properties used when a dhcp server is available on the local network. (i.E. Router) static ip address setup input a static ip address i...
11 notes.
12 t tt ttechni echni echni echni echnical support cal support cal support cal support cal support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warra...
