D-Link DWL-G630 - AirPlus G 802.11g Wireless PC Card Quick Installation Manual - Microsoft Windows Xp:
9
Appendix C - IP Address Configuration
To connect to a network, make sure the proper
network settings are configured for DWL-G630.
For
Microsoft Windows XP:
Go to Start > right click on
My Network Places
>
select Properties > Double-click on the Network
Connection associated with the DWL-G630.
Input a static IP address in the same range
as the Wireless Router or Access Point.
Static IP address setup
Click
OK
IP address:
192.168.0.52
Subnet mask:
255.255.255.0
Click
OK
Click
Internet Protocol (TCP/IP)
Click
Properties
Select
Obtain an IP address
automatically
(if the Wireless
Router or Access Point has
DHCP server enabled)
Select
Obtain DNS server
address automatically
Dynamic IP address setup
Used when a
DHCP server
is available on
the local network. (i.e. Router)
Used when a
DHCP server
is not available
on the local network.
Select
Use the following IP address