D-Link SECURICAM DCS-6511 Quick Installation Manual

Other manuals for SECURICAM DCS-6511: Specifications, User Manual, User Manual, Quick Installation Manual
Manual is about: HD Day & Night Vandal-Proof Fixed Dome Network Camera

Summary of SECURICAM DCS-6511

  • Page 1

    This document will guide you through the basic installation process for your new d-link network camera. Dcs-6511 quick installation guide hd day & night vandal-proof fixed dome network camera.

  • Page 2: Package Contents

    2 d-link dcs-6511 quick install guide system requirements package contents installation steps if any of the above items are missing, please contact your reseller. This installation guide provides basic instructions for installing the dcs-6511 network camera on your network. For additional informatio...

  • Page 3: Hardware Overview

    3 d-link dcs-6511 quick install guide hardware overview hardware overview power connector connects to 12 v dc power 24 v power connector connects to 24 v ac power ethernet jack rj-45 connector for ethernet which can also be used to power the camera using power over ethernet (poe) audio in connects t...

  • Page 4: Mounting Installation

    4 d-link dcs-6511 quick install guide hardware overview standard mounting instructions mounting installation please see the user manual for detailed instructions regarding installation and mounting the camera using a mounting bracket. Style 1 - concealed cable installation height: 23 mm (0.9 inches)...

  • Page 5

    5 d-link dcs-6511 quick install guide hardware installation style 2 - exposed cable installation height: 23 mm (0.9 inches) diameter: 183 mm (7.2 inches) weight: 400 g (0.9 lbs) figure 2.3 figure 2.4 figure 2.5 figure 2.6.

  • Page 6: Pendant Mount (Dcs-34-2)

    6 d-link dcs-6511 quick install guide hardware installation pendant mount (dcs-34-2) height: 201 mm (7.9 inches) diameter: 150 mm (5.9 inches) weight: 665 g (1.45 lbs) pendant bracket rubber seal figure 3.2 figure 3.3 figure 3.1 bracket cap figure 3.4 mounting plate.

  • Page 7: Bent Mount (Dcs-34-3)

    7 d-link dcs-6511 quick install guide hardware installation bent mount (dcs-34-3) height: 253 mm (9.96 inches) diameter: 150 mm (5.9 inches) weight: 770 g (1.7 lbs) bracket cap bent bracket figure 4.4 dome camera bent bracket figure 4.3 figure 4.1 bracket cap mounting plate figure 4.2.

  • Page 8: Connection With A Poe Hub

    8 d-link dcs-6511 quick install guide software installation connection with a poe hub if you are using a poe hub, connect the ip camera to the hub via an ethernet cable, which will provide the transmission of both power and data over a single cable. General connection using 24 v ac power wiring 1. C...

  • Page 9: Configuration With Wizard

    9 d-link dcs-6511 quick install guide configuration configuration with wizard click setup wizard to begin the installation. Insert the dcs-6511 cd into your computer's cd-rom drive to begin the installation. If the autorun function on your computer is disabled, or if the d-link launcher fails to sta...

  • Page 10: Click Next.

    10 d-link dcs-6511 quick install guide configuration click finish to complete the installation. To start the installation process, click next. Note: the installation may take several minutes to finish. Click on the d-link setup wizard se icon that was created in your windows start menu. Start > d-li...

  • Page 11: And Click Restart.

    11 d-link dcs-6511 quick install guide configuration take a moment to confirm your settings and click restart. Select dhcp if your camera obtains an ip address automatically when it boots up. Select static ip if the camera will use the same ip address each time it is started. Click next, to proceed ...

  • Page 12: Ok To Continue.

    12 d-link dcs-6511 quick install guide configuration viewing camera via web browser this section shows your camera’s live video. You can select your video profile and view or operate the camera. For additional information about web configuration, please refer to the user manual included on the cd-ro...

  • Page 13: 3-Axis Mechanism

    13 d-link dcs-6511 quick install guide adjusting the lens adjusting the lens 3-axis mount adjust the viewing angle of the 3-axis mechanism turn the lens module left and right until the desired position is achieved; tighten the pan screw once completed. Loosen the tilt screws on both sides of the cam...

  • Page 14

    14 d-link dcs-6511 quick install guide notes.

  • Page 15

    15 d-link dcs-6511 quick install guide notes.

  • Page 16: Technical Support

    16 d-link dcs-6511 quick install guide technical support d-link’s website contains the latest user documentation and software updates for d-link products. U.S. And canadian customers can contact d-link technical support through our website or by phone. United states telephone (877) 354-6555 world wi...