D-Link SECURICAM DCS-6511 Quick Installation Manual - Connection With A Poe Hub
Other manuals for SECURICAM DCS-6511:
Specifications, User Manual, User Manual, Quick Installation Manual
Manual is about: HD Day & Night Vandal-Proof Fixed Dome Network Camera
of
16
8
D-Link DCS-6511 Quick Install Guide
Software Installation
Connection with a PoE Hub
If you are using a PoE hub, connect the IP camera to the hub via an
Ethernet cable, which will provide the transmission of both power and
data over a single cable.
General Connection Using 24 V AC Power Wiring
1. Connect the network camera to a hub via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power
source such as your building's emergency power.
General Connection Using 12 V DC Power Adapter
1. Connect the network camera to a hub via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power
outlet.