D-Link xStack DES-3200 Series Installation Manual - Rear Panel Description

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch Hardware Installation Guide

Rear Panel Description 

The rear panel of the Switch contains an AC or DC power connector. The AC power connector is a standard three-

pronged connector that supports the power cord. Plug-in the female connector of the provided power cord into this 

socket, and the male side of the cord into a power outlet. The Switch automatically adjusts its power setting to any 

supply voltage in the range from 100 to 240 VAC at 50 to 60 Hz. The DC power supply has a three-terminal wiring 

block consisting of a positive (+), a negative (-) and a safety ground terminal. Connect the Kensington-compatible 

security lock, at the rear of the switch, to a secure immovable device.  Insert the lock into the notch and turn the key to 

secure the lock.  

AC LINE

100-240 VAC

50-60 Hz

0.3A MAX

Figure 1-27. Rear panel view of the DES-3200-10 

0.4A M AX

-48V

-48V R ET

-48 V

Figure 1-28. Rear panel view of the DES-3200-10-DC 

Figure 1-29. Rear panel view of the DES-3200-18 

Figure 1-30. Rear panel view of the DES-3200-18-DC 

Figure 1-31. Rear panel view of the DES-3200-26 

Figure 1-32. Rear panel view of the DES-3200-26-DC 

11