D-MAX DCC-500DV User Manual - page 3
2
3
Precautions
Warning
The camera needs periodic inspection.
Contact an authorized technician for inspection.
Stop using your camera when you find a malfunction.
If you use your camera around smoke or unusual heat for a long time,
fire may be caused.
Do not Install the camera on a surface that can not support it.
Unless the surface is suitable, it could cause falling or other hazards.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not disassemble the camera.
It may result in fire, electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in fire or other hazards.
Do not install the camera in
extreme temperature conditions.
Only use the camera under conditions
where temperatures are between -10
and 50
. Be especially careful to
provide ventilation when operating
under high temperatures.
It can cause the irnage quality to be
poor.
Do not install or use the camera in
an environment where the humidity
is high
Do not install the camera under
unstable lighting conditions.
Severe lighting change or flicker can
cause the camera to work improperly.
It is one of the most important parts of
the camera. Be careful not to be
stained by fingerprint.
Do not touch the front lens of the
camera.