D-MAX DCC-500DV User Manual - page 7
11
10
4. Installation & Dimension
5. Setup Menu Operation
1) Installation
2) Dimension
1) SETUP MENU
Please press the SETUP button Settings can now be
made. The SETUP menu is displayed on the monitor.
Please select any function you wish to activate by using
the UP and DOWN buttons.
The arrow can be moved up or down by using the UP
and DOWN buttons.
Please position the arrow to point to the function you wish
to operate.
Please press the LEFT or RIGHT button if you wish to change mode.
When the LEFT or RIGHT button is pressed, available values and modes are
displayed in order. Please keep pressing the button until you get to the mode you
wish to operate.
Please select 'EXIT' and then press the SETUP button to finish the setting.
If appears at the mode you wish to operate, it means that there is a sub-menu
which can be selected by pressing the SETUP button.
If appears at the mode item, it means that there is no mode available to be
selected.
2) LENS
This function is used to adjust the brightness of the screen.
When the SETUP menu is displayed on the screen, please position the arrow to
point to 'LENS' by using the UP and DOWN buttons.
Please select the type of the lens you wish to use by pressing the LEFT or RIGHT
Button
DOME COVER
DECOR ATIO N
RING
N o. 8-32
U N C
BASE
H O U SING
RU BB ER
BO TO TOM
BO LT
MO U NT
M 4*10
83.5
46
.0
(unit :
10
0
.0
145.0
Φ
SETUP
LENS MNUAL
SHUTTER
ESC
WHITE BAL
ATM
BACKLIGHT
OFF
AGC
LOW
DNR
LOW
SENS-UP
OFF
SPECIAL
EXIT
Note