D-MAX DCC-500F User Manual - page 11
3) SHUTTER
Auto or manual control can be selected.
When the SETUP menu
is on the screen, please
position the arrow to
point to SHUTTER' by
using the UP and DOWN
buttons.
Please select the ESC shutter mode by
pressing the LEFT or RIGHT button.
- FLK : Please select 'FLK' mode when flickering
occurs on the screen, due to an imbalance
between illumination and frequency.
(NTSC Model:1/100, PAL Model: 1/120)
- ESC : Auto control of the shutter speed can be
achieved. When ESC mode is on, the speed is
controlled automatically according to the
brightness of the screen.
- MANUAL : The shutter speed can be controlled
manually.
19
When the SETUP menu
is displayed on the
screen, please position
the arrow to point to
'LENS' by using the UP
and DOWN buttons.
Please select the type of the lens you wish to
use by pressing the LEFT or RIGHT Button
Please press the SETUP button if you wish to
return to the previous menu
MANUAL : Manual lens selection
DC : Auto iris lens selection
The brightness of the screen can be adjusted in DC
mode. The brightness can be adjusted within the
range of 1 ~ 70. The optimum level of brightness for
the user can be achieved by adjustment.
If you select the MANUAL mode, it can be adjusted
in ESC mode.
18
SETUP
LENS DC
SHUTTER
ESC
WHITE BAL
ATM
BACKLIGHT
OFF
AGC
LOW
DNR
LOW
SENS-UP
OFF
SPECIAL
EXIT
Note
LENS
brightness
50
Press Set to Return
SETUP
LENS MNUAL
SHUTTER
ESC
WHITE BAL
ATM
BACKLIGHT
OFF
AGC
LOW
DNR
LOW
SENS-UP
OFF
SPECIAL
EXIT
SETUP
LENS MNUAL
SHUTTER
ESC
WHITE BAL
ATM
BACKLIGHT
OFF