D-Teg Smarty BX4000 User Manual - page 17
Setting Drive Recorder
To record Camera2 or Camera3, Camera4 check “Use” box.
To record Audio, check “Record Audio” box.
To use Motion Detection as an Event, check “Motion” box per camera.
Record Mode
Normal Mode: Continuous recording will automatically
start after booting the BX4000.
Event Mode: Recording by Motion Detection, G-
sensor, Alarm1~3 or [PANIC] button.
Motion Sensitivity
Select Motion Detection Sensitivity from 1 to 5.
5 (High): The most sensitive
4
3 (middle): Default value
22
1 (LOW): Insensitive
To record by Motion Detection
Check Motion per camera and set Record Mode as Event Mode.
p
Dual Recording (If you set different record modes per camera)
Like camera1 set as Event record and camera2 set as Normal record, then
camera1(Event record) will work according to the record setting for
l 10f
d
di
h
th
i
t H
example 10frames per second recording, when there is a event. However
camera2(Normal record)will record 1frame per second, if there is no event.
If there is an Event, both cameras will record according to the record
setting for example 10 frames per second recording
32
Setting Drive Recorder
Resolution
PAL: 720x576, 720x288 NTSC: 720x480, 720x240
,
,
Frame Rate
1 Camera supports 1~25 fps@ 720x576, 1~25 fps @ 720x288
1 Camera supports
1~30 fps@ 720x480, 1~30 fps @ 720x240
2 Cameras supports 1~12 fps @ 720x576, 1~25 fps @ 720x288
2 Cameras supports
1~15 fps @ 720x480, 1~30 fps @ 720x240
3 Cameras supports 1 ~ 8 fps @ 720x576, 1~12 fps @ 720x288
3 Cameras supports
1~10 fps @ 720x480, 1~15 fps @ 720x240
4 Cameras supports 1 ~ 4 fps @ 720x576, 1~12 fps @ 720x288
4 Cameras supports
1 ~ 5 fps @ 720x480, 1~15 fps @ 720x240
Quality(4 level)
Super (Large file size, but good picture quality)
Low (Small file size, but low picture quality)
Pre Event
Post Event
Pre-record/Post-record time can be set here.
Pre-record time is 5~30sec, if total frame rate is below 8fps @
720x576 or 10fps @ 720x480.
Pre-record time is 5~25sec, if total frame rate is 12fps @ 720x576 or
15fps @ 720x480.
Pre record time is 5~15sec if total frame rate is 25fps @ 720x576 or
Pre-record time is 5~15sec, if total frame rate is 25fps @ 720x576 or
30fps @ 720x480.
Post-record time is 5~300sec
Overwrite
Overwrite (The image data is overwrites the oldest files
when the SD memory is full.)
One time (The recording stops automatically when the
One time (The recording stops automatically when the
SD memory is full.)
If you set Event mode only, the Max Number of Panic button Record will be
5~500.
If you set different record modes per camera (Normal Mode and Event
Mode), the Max Number of Panic button Record will be 5~10.
33
32
33