Instruction book for advantage ® electrol ®.
2 tools required for installation 1. Hang case and attach to support structure with bolts. See suggested methods of installation. 2. Tighten bolts until trim flange is flush with ceiling. Note: for proper operation, screen assembly must be level after installation. 3. Remove 2 screws to open junctio...
3 follow these steps if your screen and roller assembly was ordered separately from the case. 1. Remove the access door. First, remove the 2 screws from the ends. Be sure to support the door during this step to avoid injury. Then lift the door slightly and pull away from the edge of the case (figure...
4 advantage ® electrol ® suggested methods of installation 3/8" threaded rod (not supplied) hanger bracket electrical junction box motor end variable position mounting bracket audience side 6-7/16" 6-1/16" 7-3/4" 3/8" threaded rod (not included) attached to mounting bracket self-trimming flange fini...
5 screen adjustment for 120v screens 1. Remove the cover plate from the 3-button wall switch and remove the switch from the junction box. 2. Locate small 3-position switch on back of wall switch. See figure 5 for 120v screens or figure 8 for 220/240v screens. 3. To adjust the down limit switch, slid...
6 rj-45 receptacle rj-22 output rj-22 inputs up (dry contact) down (dry contact) common (both) bus (bus) 5v (bus) up stop down bus c o m 5 v front of wall switch bus up stop down bus c o m 5v led up limit tactile button down limit tactile button back of wall switch advantage ® electrol ® installatio...
7 rj-45 receptacle rj-22 output rj-22 inputs up (dry contact) down (dry contact) common (both) bus (bus) 5v (bus) up stop down bus c o m 5 v front of wall switch bus up stop down bus c o m 5v led up limit tactile button down limit tactile button back of wall switch up stop down bus c o m 5v power in...
8 240v wiring diagram important note: the wall switch is required to make any limit switch adjustments, even if a third party control system is used. Therefore, it is advised to wire the switch or provide a 4-conductor connection that is accessible. Advantage ® electrol ® installation for 220/240v s...
9 troubleshooting visit www.Da -lite.Com/products/tutorials.Php to find installation and troubleshooting tutorials. You will also find a link to live chat for interactive support. You can contact us by email at info@da-lite.Com or by phone at 800.622.3737 or 574.267.8101 with any additional troubles...
10
11.
Limited five year warranty on da-lite advantage ® electrol ® products only da-lite screen company llc warrants these products to the original purchaser only, to be free from defects in materials and workmanship for a period of five (5) years from the date of purchase by the original purchaser provid...
