Instruction book for idea™ panoramic.
2 hardware provided preparation tools required for assembly note: it requires at least three people to assemble an idea panoramic. To maintain optimal projected image geometry and screen assembly alignment, a flat and straight wall free from obstructions and angular distortions should be used. Creat...
3 assembly 1. Carefully unpack units and lay the panels, viewing surface down, on the clean work area (figure 1). Note: the middle panel will not have connecting bars. 2. Align the connecting bars of the side panels with the middle panel. Evenly push each side panel into the middle panel. Figure 1a ...
4 middle panel viewing surface #8 x 1/2” screws middle aluminum tray side aluminum tray side aluminum tray groove of frame tray connecting plate assembly (continued) 6. Center middle aluminum tray with the top of the vertically upright middle panel and attach with (5) #8 x 1/2” screws. Insert screws...
5 wall mounting refer to the hardware provided section on page 2 for the lengths of wall brackets included with your screen size. 1. Secure wall brackets at the desired height. Each bracket must be mounted to a flat surface into at least two wall studs. Brackets must be level to each other. Center t...
6.
7.
Limited one year warranty on da-lite presentation products milestone av technologies llc warrants certain da-lite branded products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; pr...
