Da-Lite Large Cosmopolitan Electrol Instruction Book - page 3
2
LARGE COSMOPOLITAN
®
ELECTROL
®
INSTALLATION FOR SCREENS WITHOUT A BUILT-IN LOW VOLTAGE
CONTROL
internal wiring has been completed at the factory. installer must route power to the wall switch and to the junction box
located on the left end of the screen case.
see wiring diagram below for wire connections.
NOTE: This screen can only be controlled by a single 120VAC or 240VAC wall switch. To use multiple switches, an optional low
voltage control must be used.
240 VOLT WIRING DIAGRAM FOR STANDARD WALL SWITCH:
da-Lite offers two styles of 240 volt wall switches for standard operation.
Please see wiring diagram in wall switch boxes included with screen.
uP
off
down
This swiTCh CAn noT
BE usEd wiTh LvC.
120V WIRING DIAGRAM FOR
STANDARD WALL SWITCH
sPdT swiTCh wiTh
CEnTER off
AC (CoMMon)
AC hoT 120vAC 60hZ 1 AMP
BLACK/YELLow
BLACK
REd
whi
TE
RE
d
(u
P)
BLACK (
down
)
JunCTion BoX
LoCATEd in
LEfT EndCAP
whiTE
REd
BLACK
gREEn
MoToR
noTE: A singLE swiTCh CAnnoT BE
usEd To oPERATE MoRE ThAn
onE sCREEn. ConTACT ThE
fACToRY foR fuRThER
infoRMATion.