Dacor CM24PBISAS Installation Instructions Manual - Mportant
I
mporTanT
s
afeTy
I
nsTruCTIons
b
efore
I
nsTallIng
The
C
offee
s
ysTem
:
1.
Use the right type of water:
Call the local water company. Ask them for the water hardness level of the water supplied to the building
where the coffee system will be installed.
2.
If the water hardness level is above four grains per gallon (4gpg):
►
For model CM24TBISAS: during cleaning, testing, and normal use, pour only filtered water with a
hardness level of 4gpg or less into the water tank. Do not use distilled water.
►
For model CM24PBISAS: contact a water treatment specialist and have a water treatment system
installed to reduce the water hardness level to 4gpg or less.
IMPORTANT: Dacor
®
does not recommend installation of a reverse osmosis filtration system. Reverse
osmosis systems can cause low water pressure. When the water pressure is low, the coffee water volume
(level) can fluctuate and the water pump may make a “hammering” sound.
Before operating the coffee system for the first time:
Clean the coffee system completely according to the Cleaning and Maintenance section (including
the System Cleaning Instructions) of the use and care manual.
CAUTION
Any questions or problems with this installation
should be directed to your Dacor
®
dealer or the Dacor
®
Customer Service Department.
Dacor
®
Customer Service
1-800-793-0093 (U.S.A. and Canada)
Monday — Friday 6:00
a
.
m
. to 5:00
p
.
m
. Pacific Time
e-mail: customerservice@Dacor.com.
Web site: www.Dacor.com
If the unit requires service, be sure to have the model and
serial number available when you call. The model and
serial number are on the data plate located on the left side
of the unit.