Daewoo DSP-4210GM Instruction Manual - page 2
Unplug the monitor from the wall outlet and
disconnect the interfacing cable system
during a lightning storm or when left
unattended and unused for long periods of
time. This will prevent damage to the unit
due to lightning and power-line surges.
Avoid overhead power lines. An external
connection cables should not be placed in the
vicinity of overhead power lines or other
electric light or power circuits. When
installing an external connection cables be
careful to keep from touching the power
lines or circuits. Contact with such lines can
be fatal.
Do not overhead the wall outlet or extension
cords. Overloading can result in fire or
electric shock.
Do not insert foreign objects through
openings in the units, as they may tough
dangerous voltage points or damage parts.
Never spill liquid of any kind on the monitor.
Do not attempt to service this monitor
yourself. Refer all servicing to qualified
service personnel. Unplug the unit from the
wall outlet and refer servicing to qualified
service personnel under the following
conditions :
when the power-supply cord or plug is
damaged
if liquid has been spilled on or objects
have fallen into the unit
if the monitor has been exposed to rain or
water
if the monitor does not operate normally
by following the operating instructions
if the monitor has been dropped or the
cabinet has been damaged
when the monitor exhibits a distinct
change in performance
If you make adjustments yourself, adjust
only those controls that are covered by the
operating instructions. Adjusting other
controls may result in damage and will often
require extensive work by a qualified
technician to restore the monitor to normal.
When replacement parts are required, be sure
the service technician uses replacement parts
specified by the manufacturer or those that
have the same characteristics as the original
part. Unauthorized substitutions may result
in additional damage to the unit.
Upon completion of any service or repairs to
this monitor, ask the service technician to
perform safety checks to determine that the
monitor is in a safe operating condition.