1. DL manuals
  2. Diluo
  3. Dispenser
  4. K1500186-040
  5. User Manual

Diluo K1500186-040 User Manual - Signals

Manual is about: Baby meal brewer

Summary of K1500186-040

  • Page 1

    Baby meal brewer user manual art.Nr k1500186-040 www.Mydiluo.Se rev. P02, 2015-06-03.

  • Page 2: Contents

    2 contents important information 2 disposal 4 overview of the appliance 5 before use 8 using the appliance 8 - filling with water 8 - fitting the bottle 9 - filling with powdered formula 9 - signals 11 making the formula 12 cleaning 12 - daily cleaning 12 - cleaning as required 15 - descaling 18 tro...

  • Page 3

    3 fire damage warranty lock water the appliance is not intended for usage on their own by children, nor persons with reduced physical, mental or sensory capabilities, or lack of experience/knowledge, unless they are supervised by a person responsible for their safety or has been given necessary inst...

  • Page 4: Disposal

    4 disposal the product is marked according to eu directive 2002/96/ec regarding the disposal and recycling of waste which comprises electrical or elec- tronic devices. The symbol below indicates that the appliance must not be treated as household waste, but should be handed over to the appli- cable ...

  • Page 5: Overview Of The Appliance

    5 overview of the appliance.

  • Page 6

    6.

  • Page 7

    7.

  • Page 8: Before Use

    8 before use - place the appliance on a flat surface. - insert the plug (17) into an earthed wall socket. - switch the power on (16) on the back of the appliance. - fill with water – see ‘filling with water’ under ‘using the appliance’. - fill with powder – see ‘filling with powdered formula’ under ...

  • Page 9: Fitting The Bottle

    9 filling with powdered formula - open the front cover (1). - pull the powder container out (10) using the handle (19). Fitting the bottle - choose any wide-neck type bottle (7). - push the bottle into the bottle holder (6). - make sure that the bottle is straight and is pushed in all the way..

  • Page 10

    10 - check that the powder level indicator (24) is fully in its grooves on the powder container, and that it is pointing straight down. - lift the lid (18) of the powder container and move the leveller (28) to the mark in the powder container. See the picture below. - fill the container with powdere...

  • Page 11: Signals

    11 signals the appliance has a signalling system for different kinds of faults. Light signals (15) behind the water container and in the buttons (see the illustration, right) indi- cate as described below. During use filling cleaning - a constant white light behind the water container and on the sel...

  • Page 12: Making The Formula

    12 making the formula - choose a large enough bottle for the selected portion size. - make sure the bottle is properly fitted in the bottle holder. - press the button for the desired portion size to begin preparation, or - select the desired portion size and start preparation via the app. - when the...

  • Page 13

    13 - disconnect the outlet hose (13) from the mixing funnel (12). - remove the mixing funnel and impeller by pulling them straight out..

  • Page 14

    14 - remove the mixing funnel attachment (22) by turning it to the right to detach, and then pull it straight out. - remove the mixing funnel lid (21) by turning it counter clockwise and lifting it up. - rinse and wipe clean all loose parts before replacing them..

  • Page 15: Cleaning As Required

    15 - the overflow tray (9) is lifted straight up from the appliance. The tray cover (8) is loose and can simply be taken off. - wash the overflow tray and cover up by hand. Cleaning as required to access other parts for cleaning, they must be removed from the appli- ance. Do this following the instr...

  • Page 16

    16 - if further cleaning and dismantling is needed, loosen the powder out- let locking nut (20) and carefully pull it out of the powder container. - loosen the locking peg (26) which holds the stirrer (29) and leveller (28) in place by squeezing the sides together and pushing down..

  • Page 17

    17 - once the locking peg has been loosened, the stirrer and leveller can be lifted upwards. - loosen the dosage screw’s locking nut (25) by turning it counter clock- wise..

  • Page 18: Descaling

    18 - remove the loose parts from the powder container. Descaling - mix 15 grams of citric acid or acetic acid with 1 litre of water in the wa- ter container. - place a vessel that can take at least 1 litre under the appliance’s outlet. - hold the cleaning button in for 10 seconds to start the descal...

  • Page 19: Troubleshooting

    19 troubleshooting problem cause action the appliance does not react. The power switch is not on. Switch on the power on the back of the appli- ance . The appliance is not plugged in. I nsert the plug into an earthed wall socket. The appliance will not make formula. The appliance is indicating that ...

  • Page 20: Technical Data

    20 the formula is not the right temperature. The temperature setting needs adjusting. Adjust the temperature using the app. The appliance indicates no water container/ low water level. The water container is miss- ing or the water level is too low. Remove the water con- tainer and refill it with wat...