Baby meal brewer user manual art.Nr k1500186-040 www.Mydiluo.Se rev. P02, 2015-06-03.
2 contents important information 2 disposal 4 overview of the appliance 5 before use 8 using the appliance 8 - filling with water 8 - fitting the bottle 9 - filling with powdered formula 9 - signals 11 making the formula 12 cleaning 12 - daily cleaning 12 - cleaning as required 15 - descaling 18 tro...
3 fire damage warranty lock water the appliance is not intended for usage on their own by children, nor persons with reduced physical, mental or sensory capabilities, or lack of experience/knowledge, unless they are supervised by a person responsible for their safety or has been given necessary inst...
4 disposal the product is marked according to eu directive 2002/96/ec regarding the disposal and recycling of waste which comprises electrical or elec- tronic devices. The symbol below indicates that the appliance must not be treated as household waste, but should be handed over to the appli- cable ...
5 overview of the appliance.
6.
7.
8 before use - place the appliance on a flat surface. - insert the plug (17) into an earthed wall socket. - switch the power on (16) on the back of the appliance. - fill with water – see ‘filling with water’ under ‘using the appliance’. - fill with powder – see ‘filling with powdered formula’ under ...
9 filling with powdered formula - open the front cover (1). - pull the powder container out (10) using the handle (19). Fitting the bottle - choose any wide-neck type bottle (7). - push the bottle into the bottle holder (6). - make sure that the bottle is straight and is pushed in all the way..
10 - check that the powder level indicator (24) is fully in its grooves on the powder container, and that it is pointing straight down. - lift the lid (18) of the powder container and move the leveller (28) to the mark in the powder container. See the picture below. - fill the container with powdere...
11 signals the appliance has a signalling system for different kinds of faults. Light signals (15) behind the water container and in the buttons (see the illustration, right) indi- cate as described below. During use filling cleaning - a constant white light behind the water container and on the sel...
12 making the formula - choose a large enough bottle for the selected portion size. - make sure the bottle is properly fitted in the bottle holder. - press the button for the desired portion size to begin preparation, or - select the desired portion size and start preparation via the app. - when the...
13 - disconnect the outlet hose (13) from the mixing funnel (12). - remove the mixing funnel and impeller by pulling them straight out..
14 - remove the mixing funnel attachment (22) by turning it to the right to detach, and then pull it straight out. - remove the mixing funnel lid (21) by turning it counter clockwise and lifting it up. - rinse and wipe clean all loose parts before replacing them..
15 - the overflow tray (9) is lifted straight up from the appliance. The tray cover (8) is loose and can simply be taken off. - wash the overflow tray and cover up by hand. Cleaning as required to access other parts for cleaning, they must be removed from the appli- ance. Do this following the instr...
16 - if further cleaning and dismantling is needed, loosen the powder out- let locking nut (20) and carefully pull it out of the powder container. - loosen the locking peg (26) which holds the stirrer (29) and leveller (28) in place by squeezing the sides together and pushing down..
17 - once the locking peg has been loosened, the stirrer and leveller can be lifted upwards. - loosen the dosage screw’s locking nut (25) by turning it counter clock- wise..
18 - remove the loose parts from the powder container. Descaling - mix 15 grams of citric acid or acetic acid with 1 litre of water in the wa- ter container. - place a vessel that can take at least 1 litre under the appliance’s outlet. - hold the cleaning button in for 10 seconds to start the descal...
19 troubleshooting problem cause action the appliance does not react. The power switch is not on. Switch on the power on the back of the appli- ance . The appliance is not plugged in. I nsert the plug into an earthed wall socket. The appliance will not make formula. The appliance is indicating that ...
20 the formula is not the right temperature. The temperature setting needs adjusting. Adjust the temperature using the app. The appliance indicates no water container/ low water level. The water container is miss- ing or the water level is too low. Remove the water con- tainer and refill it with wat...