Summary of K1500186-040
Page 1
Baby meal brewer user manual art.Nr k1500186-040 www.Mydiluo.Se rev. P02, 2015-06-03.
Page 2: Contents
2 contents important information 2 disposal 4 overview of the appliance 5 before use 8 using the appliance 8 - filling with water 8 - fitting the bottle 9 - filling with powdered formula 9 - signals 11 making the formula 12 cleaning 12 - daily cleaning 12 - cleaning as required 15 - descaling 18 tro...
Page 3
3 fire damage warranty lock water the appliance is not intended for usage on their own by children, nor persons with reduced physical, mental or sensory capabilities, or lack of experience/knowledge, unless they are supervised by a person responsible for their safety or has been given necessary inst...
Page 4: Disposal
4 disposal the product is marked according to eu directive 2002/96/ec regarding the disposal and recycling of waste which comprises electrical or elec- tronic devices. The symbol below indicates that the appliance must not be treated as household waste, but should be handed over to the appli- cable ...
Page 5: Overview Of The Appliance
5 overview of the appliance.
Page 6
6.
Page 7
7.
Page 8: Before Use
8 before use - place the appliance on a flat surface. - insert the plug (17) into an earthed wall socket. - switch the power on (16) on the back of the appliance. - fill with water – see ‘filling with water’ under ‘using the appliance’. - fill with powder – see ‘filling with powdered formula’ under ...
Page 9: Fitting The Bottle
9 filling with powdered formula - open the front cover (1). - pull the powder container out (10) using the handle (19). Fitting the bottle - choose any wide-neck type bottle (7). - push the bottle into the bottle holder (6). - make sure that the bottle is straight and is pushed in all the way..
Page 10
10 - check that the powder level indicator (24) is fully in its grooves on the powder container, and that it is pointing straight down. - lift the lid (18) of the powder container and move the leveller (28) to the mark in the powder container. See the picture below. - fill the container with powdere...
Page 11: Signals
11 signals the appliance has a signalling system for different kinds of faults. Light signals (15) behind the water container and in the buttons (see the illustration, right) indi- cate as described below. During use filling cleaning - a constant white light behind the water container and on the sel...
Page 12: Making The Formula
12 making the formula - choose a large enough bottle for the selected portion size. - make sure the bottle is properly fitted in the bottle holder. - press the button for the desired portion size to begin preparation, or - select the desired portion size and start preparation via the app. - when the...
Page 13
13 - disconnect the outlet hose (13) from the mixing funnel (12). - remove the mixing funnel and impeller by pulling them straight out..
Page 14
14 - remove the mixing funnel attachment (22) by turning it to the right to detach, and then pull it straight out. - remove the mixing funnel lid (21) by turning it counter clockwise and lifting it up. - rinse and wipe clean all loose parts before replacing them..
Page 15: Cleaning As Required
15 - the overflow tray (9) is lifted straight up from the appliance. The tray cover (8) is loose and can simply be taken off. - wash the overflow tray and cover up by hand. Cleaning as required to access other parts for cleaning, they must be removed from the appli- ance. Do this following the instr...
Page 16
16 - if further cleaning and dismantling is needed, loosen the powder out- let locking nut (20) and carefully pull it out of the powder container. - loosen the locking peg (26) which holds the stirrer (29) and leveller (28) in place by squeezing the sides together and pushing down..
Page 17
17 - once the locking peg has been loosened, the stirrer and leveller can be lifted upwards. - loosen the dosage screw’s locking nut (25) by turning it counter clock- wise..
Page 18: Descaling
18 - remove the loose parts from the powder container. Descaling - mix 15 grams of citric acid or acetic acid with 1 litre of water in the wa- ter container. - place a vessel that can take at least 1 litre under the appliance’s outlet. - hold the cleaning button in for 10 seconds to start the descal...
Page 19: Troubleshooting
19 troubleshooting problem cause action the appliance does not react. The power switch is not on. Switch on the power on the back of the appli- ance . The appliance is not plugged in. I nsert the plug into an earthed wall socket. The appliance will not make formula. The appliance is indicating that ...
Page 20: Technical Data
20 the formula is not the right temperature. The temperature setting needs adjusting. Adjust the temperature using the app. The appliance indicates no water container/ low water level. The water container is miss- ing or the water level is too low. Remove the water con- tainer and refill it with wat...