E-FLITE Carbon-Z Splendor Instruction Manual - Service of Power Components
EN
Disassembly
1. Remove the screw (
A) and spinner (B) from the collet (G).
2. Remove the spinner nut (
C), propeller (D), spinner back plate (E), backplate
(
F) and collet from the motor shaft (H). You will need a tool to turn the
spinner nut.
3. Remove 2 screws (
I) from inside the cowling (J). Carefully remove the
cowling from the fuselage. Paint may keep the cowling attached to the
fuselage.
4. Remove the 4 screws (
K) from the motor mount (O) and the fuselage (L).
5. Disconnect the motor wires from the ESC wires.
6. Remove the 4 screws (
M) and motor (N) from the motor mount.
Assembly
Assemble in reverse order.
1. Correctly align and connect the motor wire colors with the ESC wires.
2. The propeller size numbers (14 x 7) must face out from the motor for
correct propeller operation.
3. A tool is required to tighten the spinner nut on the collet.
Not all wiring shown.
A
L
B
G
H
M
O
N
F
C
D
J
K
K
E
Service of Power Components
Propeller Warnings and Precautions
Failure to comply with these warnings and/or improperly using this propeller
may result in serious injury. Read all safety precautions and warnings before
use.
• Always keep body parts, hair and loose clothing away from the propeller.
Failure to do so can result in injury and damage
• Alwayskeeplooseobjectsawayfromthepropeller,includingdirt,gravel,tools,
stringandpaper
• Alwaysensurespectators,especiallychildren,areatleast30feet(9meters)
awaywhenoperatingtheaircraft
• Alwaysensurethepropellerandallfastenersaresecurelyattachedbefore
EACHflight.Propellersmayloosenorsustaindamageduringflight,landing,
crashesorstorage
• Alwaysstandbehindthepropellerwhenmakingadjustmentstoyouraircraft
• Alwaysconfirmapropelleriscorrectlybalancedbeforeinstallation
• Alwaysusethecorrectsizeandpitchofpropellerforyouraircraft
• Alwaysdiscardanypropellerthatiswarped,nicked,scratched,crackedor
damagedinanyway
• Alwaysensureaninstalledspinnerdoesnottouchthepropellertoavoidvibra-
tionandabrasion
• Neverputorthrowanyobjectintoamovingpropellerforanyreason.Remove
powerfromthemotortostopthepropeller
• Neveraccidentallyexposethepropellertoexcessiveheatorcold.Failuretodo
socanresultindamage
• Neverattempttorepairormodifyapropellerbeyonditsintendeduse
An Advanced Precision Composites “APC” brand propeller has been selected for use with your E-flite Splendor aircraft. This
propeller was installed at the factory and it is designed for use on model airplanes only. Proper inspection, balance and
installation are required for safe operation.
CAUTION: Always keep hands away from the propeller. When armed,
the motor will turn the propeller in response to any throttle movement.
I
13