E-ZY EZ-GO Quick Install Manual - page 5
5
8. UPGRADE FIRMWARE: For the latest firmware point your browser
to
http://www.e-zy.net/support/2plus/Firmware/
. Download the latest
firmware to your PC. Select UPGRADE from the menu and then browse
for the new file.
Advanced Features
The EZ-Go
®
has many advanced features if more functionality is de-
sired. To access the advanced features, click on
Advanced Web
at the
top of the menu tree. This will activate the advanced menu options.
The EZ-Go
®
can operate as Access Point, Client, WDS, AP+WDS,
Point to Point. Go to WIRELESS | BASIC SETTINGS to change wire-
less mode. Go to ETHERNET | IP SETTINGS to change network op-
eration mode from Bridge (default) to Router.
Since documentation for these advanced modes is too extensive to
cover here please retrieve the documentation online at
http://www.e-
zy.net/support/2plus/Documentation/
:
TECH CORNER
Additional Information you may find useful
1.
RAIN, SNOW, ICE – The 2.4GHz frequency being used by the EZ-
Go
®
will not be affected by heavy rain or falling snow. You should not
see any performance degradation due to inclement weather. If snow or
ice collects on the front of the antenna, you may see some reduced per-
formance assuming you are shooting a long distance ( >3miles) and the
ice or snow buildup is greater than 1” thick on the surface of the an-
tenna. For this reason, we suggest mounting under an eave of a house
if feasible for your particular situation.
2.SUN AND HEAT– The EZ-Go
®
is constructed of all UV protected
materials so it will survive for many years in the most extreme of solar
environments (ie; an Arizona rooftop during the summer). The unit has
been tested and qualified for constant operation at over 122 deg F am-
bient temperature. Even though the EZ-Go
®
is designed for long term
survivability in extreme environments, we would still recommend that
the unit be mounted in a more protected location, like under a roof eve,
if possible. Of course if line of sight is better with the antenna mounted
in a non-protected environment then we would recommend the better
line of sight mounting location.