Summary of EA610
Page 3
-2- 1. Safety and overview safety precautions (in order to ensure the safety, please observe the following) please be sure to read the user’s manual before use. please charge the product for more than 8 hours before using it. when the battery has been discharged or the storage period has been ...
Page 4
-4- 2 installation instructions 2.1 unpacking and checking 2.1.1 unpack ups, and check accessories host instructions warranty card communication line power cord cd battery connecting wire (not provided for standard ups) accessories of fixed support (not provided for tower ups) rack (wall-mounted) ac...
Page 5
-6- fig. 2.3.2 3u 1.5kva-3kva rack rear panel description of rear panel a) fan and fan guard b) output power supply socket c) ac over-current protector d) iec input socket e) communication interface (standard configuration usb+rj45) f) snmp card slot g) external battery connector 2.4 product install...
Page 6
-8- fig. 2.4.2 schematic diagram of dc48v tower battery connection fig. 2.4.2 schematic diagram of dc24v rack battery connection fig. 2.4.2 schematic diagram of dc48v rack battery connection 2.4.3 installation 1. This product shall be installed by professionals. The provided power cord can be b conn...
Page 7
-10- fig. 2.4.3 installation of rack parts when the rack parts have been installed, fasten ups to the rack (as shown below). Fig. 2.4.3 rack installation screws rack foot pieces -11- 3. Function setting of panel keys and description of lcd display 3.1 description of panel keys description of rack pa...
Page 8
-12- 1) in non-setting mode, press the key momentarily to turn the page (page up). 2) in setting mode, the parameter decreasing iterates. 1) in non-setting mode, press the key momentarily to turn the page (page down). 2) in setting mode, the parameter decreasing iterates. 3) in non-setting mode, pre...
Page 9
-14- 7. In the setting mode of tower ups, by pressing functional setting key and “page up” or “page down” key, the output voltage value, frequency, low voltage shutdown time, charging current, inverter no-load shutdown function, inverter no-load power saving mode, dc self-starting function and ac se...
Page 10
-16- 3. After selecting “confirm”, press the key “ ” momentarily to save the interface (by reference to “save and exit setting”). Press the key “ ” or “ ” momentarily, choose “yes”, and then press the key “ ” momentarily to save and exit it. 5.2 frequency setting 1. The left figure shows the frequen...
Page 11
-18- 2. Press the function setting key “ ” for more than 5 seconds to enter the setting interface. Press the key “ ” momentarily to select the battery end of discharge voltage setting interface. Press the key “ ” or “ ” momentarily to select the battery end of discharge voltage. Available voltage va...
Page 12
-20- 2. Press the function setting key “ ” for more than 5 seconds to enter the setting interface. Press the key “ ” momentarily to select inverter no-load power saving function setting interface. Press the key “ ” or “ ” momentarily to select the inverter no-load power saving function. The user can...
Page 13
-22- 2. In setting mode, after confirming the selected parameters, press the key “ ” momentarily to save the interface. Press the key “ ” or “ ” momentarily, choose “yes”, and then press the key “ ” momentarily to save and exit it. Direct-exit setting 1. Press the key combination “ ” for 5 seconds i...
Page 14
-24- 7. Technical specifications note “s” refers to tower standard model. “h” refers to tower extended runtime model rts refers to rack rt convertible standard model. Rth refers to rack rt convertible extended runtime model. Model 1000va (s/h/rt) 1500va (s/rt) 2000va (s/h/rt) 3000va (s/h/rt) dc inpu...
Page 15
-26- net weight (kg) 12.2 (s) 8.9 (h) 14.2 (s) 18.5 (s) 13.2 (h) 28.1 (s) 22.5 (h) gross weight (kg) 13.2 (s) 10 (h) 15.2 (s) 19.8 (s) 14.2 (h) 30.2 (s) 23.9 (h) rack mount dimension (mm) 338*440*88 410*440*132 packing dimension (mm) 611*448*208 611*505*235 net weight (kg) 14.6 (rts) 17.2 (rts) 21.3...
Page 16
-28- 2. Maintain the load condition, and record the total power. Disconnect ups input plug (to simulate the interruption of utility power). Ups enters battery discharge mode, until it is shut down automatically. And record the discharge time. Keep the record of initial discharge time for future use....