Easypix Ultra Slim User Manual - page 7
6
Turning on the camera
Press the Power button once to turn on the camera. Press it again to turn the camera off.
Note:
•
The camera has an automatic time-out feature to conserve battery life. After one minute
(or 2 minutes) the camera will time-out (turn off). When timed out, the camera will not
take a photo when you push the shutter button. Press the Power button once to turn on the
camera again.
•
If power is low, the red LED blinks 5 times and then the camera turns off. Recharge the
battery immediately.
Turning on the LCD
The LCD screen comes on automatically in preview mode when the power is turned on.
Press the LCD button to switch to preview mode. Press the LCD button again to turn off the
LCD.
Understanding LCD icons
LCD Description
Picture Counter: Shows remaining number of shots.
Resolutions:
: SMALL 1000 x 750 pixels
: MED 2000 x 1500 pixels
.
: LARGE 4620 x 3465 pixels
Indicates Battery Charge State
: The battery is fully charged
: The battery is about half-charged
: Out of battery: need to recharge immediately
Secure Digital card indicator
Flash indicator: Flash icon blinks while charging. Steady on when flash is set to
Automatic.
Mode selection
Your camera has three modes of operation:
•
Capture mode (for capturing images)
•
Playback mode (for reviewing and deleting images)
•
USB mode (for downloading images to a computer and charging the battery)
When the USB cable is connected to the camera and a computer, the camera automatically
goes to USB mode.