1. DL manuals
  2. Eaton
  3. UPS
  4. Powerware 9155
  5. User manual

Eaton Powerware 9155 User manual

Other manuals for Powerware 9155: Reference Manual, User Manual, User Manual, User Manual, User manual
Manual is about: (500 VA – 60 kVA)

Summary of Powerware 9155

  • Page 1

    Eaton 9155 parallel ups 8–15 kva user's guide ®.

  • Page 3: Class A Emc Statements

    Class a emc statements fcc part 15 note this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a c...

  • Page 4: Special Symbols

    Special symbols the following are examples of symbols used on the ups or accessories to alert you to important information: risk of electric shock - observe the warning associated with the risk of electric shock symbol. Caution: refer to operator's manual - refer to your operator's manual for additi...

  • Page 5

    Eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality i table of contents 1 introduction 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 safety warnings 3 . . . . . . . . . . . . . . . . . . ...

  • Page 6

    Table of contents eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality ii.

  • Page 7

    Eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 1 chapter 1 introduction a parallel system with up to three uninterruptible power supplies (upss) can be installed to provide a parallel capacity and/or redundant system. This load sharing system provides mo...

  • Page 8

    Introduction eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 2.

  • Page 9: Save These Instructions

    Eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 3 chapter 2 safety warnings important safety instructions save these instructions this manual contains important instructions that you should follow during installation and maintenance of the ups and batteri...

  • Page 10: Consignes De Sécurité

    Safety warnings eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 4 consignes de sécurité consignes de sÉcuritÉ importantes conserver ces instructions ce manuel contient des consignes de sÉcuritÉ importantes d a n g e r ! Cet onduleur contient des tensions ...

  • Page 11: Advertencias De Seguridad

    Safety warnings eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 5 advertencias de seguridad instrucciones de seguridad importantes guarde estas instrucciones este manual contiene instrucciones de seguridad importantes p e l i g r o este sie contiene volta...

  • Page 12

    Safety warnings eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 6.

  • Page 13: Inspecting The Equipment

    Eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 7 chapter 3 ups setup this chapter describes: s equipment inspection s floor loading and clearances s unloading the cabinet(s) the instructions are intended for the chief operator/system supervisor, electric...

  • Page 14: Floor Loading

    Ups setup eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 8 floor loading when planning the installation, consider the ups weight for floor loading. The strength of the installation surface must be adequate for point and distributed loadings. The approxim...

  • Page 15: Unloading The Cabinet(S)

    Ups setup eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 9 unloading the cabinet(s) the following tools are required for unloading the cabinet(s): s 15 mm wrench or socket s 7 mm nutdriver or socket c a u t i o n the ups and extended battery module (ebm)...

  • Page 16

    Ups setup eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 10 3. Remove the front cover from the bottom cabinet to access the front shipping bracket. Press and release the handle latch at the bottom of the cover and then lift the cover up and off the cabin...

  • Page 17

    Ups setup eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 11 note be sure to support the front and back of the cabinet when rolling it off the pallet to prevent tipping. 7. Slowly roll the cabinet toward the rear of the pallet. Once the pallet tilts, cont...

  • Page 18

    Ups setup eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 12.

  • Page 19

    Eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 13 chapter 4 parallel installation the eaton 9155 has the following power connections: s 2‐phase (l1 and l2), neutral, and ground connection for rectifier/bypass input s 2‐phase (l1 and l2), neutral, and gro...

  • Page 20

    Parallel installation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 14 w a r n i n g only qualified service personnel (such as a licensed electrician) should perform the ups installation and initial startup. Risk of electrical shock. To hardwire the par...

  • Page 21

    Parallel installation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 15 5. Remove the parallel tie cabinet front cover (see figure 6). Parallel cabinet figure 6. Parallel tie cabinet front cover 6. Remove the internal cover to gain access to the breakers...

  • Page 22

    Parallel installation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 16 7. Punch holes for the conduit (ac input, each ups output, and load connection) using a greenlee ® punch or similar device. 8. Verify that the parallel bypass breaker is in the off p...

  • Page 23

    Parallel installation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 17 10. Verify that each ups battery circuit breaker is in the off position (see figure 9). On off ups wiring access cover conduit landing battery connector battery circuit breaker figur...

  • Page 24

    Parallel installation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 18 note input neutral must be wired for proper operation. Failure to connect an input neutral will void the warranty. Table 2. Ups terminal block wiring wire function terminal position ...

  • Page 25

    Parallel installation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 19 13. Hardwire the output terminations (tb1‐6 through tb1‐9) from each ups to the parallel tie cabinet (see figure 11). Ups 1 ups 2 ups 3 neutral line 1 line 2 line 1 line 2 line 1 lin...

  • Page 26

    Parallel installation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 20 15. Hardwire the load to the parallel tie cabinet (see figure 12). Line 1 line 2 neutral figure 12. Load connections.

  • Page 27

    Parallel installation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 21 16. Wire the ac input to the bypass breaker (see figure 13). Line 1 neutral line 2 figure 13. Parallel ac input wiring 17. Verify the phase rotation for each ups and the bypass input...

  • Page 28

    Parallel installation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 22 figure 14. Parallel wiring diagram.

  • Page 29

    Eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 23 chapter 5 installing options this section describes the powerware hot sync can bridge card. For other options, such as additional x-slot ® cards, power management software, remote emergency power-off (rep...

  • Page 30

    Installing options eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 24 powerware hot sync can bridge card the powerware hot sync can bridge card, shown in figure 16, can be installed to provide connectivity for operational mode control and metering of a pa...

  • Page 31

    Installing options eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 25 2. If you ordered a factory-configured parallel ups, remove the powerware hot sync can bridge card from the x-slot on the front of the ups. Retain the screws. Otherwise, remove the x-sl...

  • Page 32

    Installing options eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 26 note if you are installing another x-slot card, be sure to install the powerware hot sync can bridge card in x-slot 2. 4. Loosely install the powerware hot sync can bridge card into an ...

  • Page 33

    Installing options eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 27 ups #1 ups #2 ups #3 figure 19. Can bridge card wiring.

  • Page 34

    Installing options eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 28 8. Secure the powerware hot sync can bridge card with the screws removed in step 2. 9. On the bottom cover (and also the middle cover if 3-high), remove a knockout tab in the top edge o...

  • Page 35

    Installing options eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 29 11. Reinstall the front covers, starting with the bottom cabinet (see figure 21). Hang the top edge of the cover on the cabinet first, then lower the bottom edge and snap into place. Be...

  • Page 36

    Installing options eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 30

  • Page 37

    Eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 31 chapter 6 stabilizing the cabinet note for seismic installations, you must order and install an eaton 9155 ups seismic kit; do not use the following instructions. Note for non-seismic installations, you m...

  • Page 38

    Stabilizing the cabinet eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 32 4. Continue to one of the following sections: s “extended battery module installation” on page 35 to install optional ebms. S “operation” on page 39 to start up the parallel ups sy...

  • Page 39

    Stabilizing the cabinet eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 33 m4 screws figure 24. Stabilizing bracket with two cabinets m4 screws figure 25. Stabilizing bracket with three cabinets.

  • Page 40

    Stabilizing the cabinet eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 34.

  • Page 41

    Eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 35 chapter 7 extended battery module installation note a maximum of 22 battery strings can be installed in one configuration, including ups batteries (4 ebm-64 models or 3 ebm-96 models). Ups-32 models conta...

  • Page 42

    Extended battery module installation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 36 ups battery connector rear ground strap ebm battery circuit breaker ebm battery connector ebm cable ups battery circuit breaker on off figure 26. Typical ebm installat...

  • Page 43

    Extended battery module installation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 37 8. Remove the top front covers of all cabinets. Press and release the handle latch at the bottom of the cover and then lift the cover up and off the cabinet. 9. Instal...

  • Page 44

    Extended battery module installation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 38.

  • Page 45: Control Panel Functions

    Eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 39 chapter 8 operation this chapter contains information on how to use the eaton 9155, including front panel operation, ups startup and shutdown, and configuring the ups for extended battery modules (ebms). ...

  • Page 46

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 40 the following table shows the indicator status and description. Indicator status description green on the ups is operating normally. Flashing s the ups is starting up or is shut down and waiting...

  • Page 47

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 41 the following table shows the basic menu structure. Table 3. Menu map for display functions main menu submenu display information or menu function ups status system normal / battery floating ups...

  • Page 48

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 42 user settings the following table displays the options that can be changed by the user. Note changes to the output voltage or frequency options should be made before turning on the ups; otherwis...

  • Page 49

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 43 table 4. User settings (continued) default setting available settings description modem config modem installation set modem call events event #0 call modem: no set modem init string atz0 set mod...

  • Page 50

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 44 table 4. User settings (continued) default setting available settings description synchronization window ±0.5 through ±3.0 hz (0.1 hz increments) ±2.0 hz unsynchronized transfer to bypass allowe...

  • Page 51: Parallel Ups Startup

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 45 parallel ups startup w a r n i n g only qualified service personnel (such as a licensed electrician) should perform the ups installation and initial startup. Risk of electrical shock. Verify tha...

  • Page 52

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 46 6. Configure the ups for parallel operation through the front panel: s press any button on the front panel display to activate the menu options. S using the button, scroll to the settings menu, ...

  • Page 53

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 47 9. Shut down each ups: s press the button on the front panel display and then press the button to select the turn ups on/off menu. S press the button to select the ups off option; press the butt...

  • Page 54

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 48 17. Select the system on option; press the button. 18. Confirm the selection. Press and hold the button for three seconds, until the ups stops beeping. The ups goes to bypass mode for five secon...

  • Page 55: Configuring The Ups For Ebms

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 49 configuring the ups for ebms note each ups in a parallel system must have its own ebm and the same number of ebms to ensure consistent runtimes. To ensure maximum battery runtime, configure the ...

  • Page 56: Parallel System Shutdown

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 50 parallel system shutdown to remove power to the parallel ups system output: 1. Press any button on the front panel display to activate the menu options. 2. Press the button on the front panel di...

  • Page 57: Individual Ups Shutdown

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 51 individual ups shutdown to shut down a single ups in the parallel system: 1. Press any button on the front panel display to activate the menu options. 2. Press the button on the front panel disp...

  • Page 58

    Operation eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 52 restarting the parallel system to restart the parallel system: 1. Verify that all ups breakers on the parallel tie cabinet are in the off position. 2. Switch on utility power where the upss are ...

  • Page 59

    Eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 53 chapter 9 parallel bypass to switch the parallel ups to maintenance bypass from normal mode: 1. From any ups, set the system to internal bypass mode: s using the button on the front panel display, scroll ...

  • Page 60

    Parallel bypass eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 54 to return to normal mode from maintenance bypass: 1. Verify that all ups breakers on the parallel tie cabinet are in the off position. 2. Switch on utility power where the upss are connect...

  • Page 61

    Eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 55 chapter 10 troubleshooting the eaton 9155 is designed for durable, automatic operation and also alerts you whenever potential operating problems may occur. Usually the alarms shown by the control panel do...

  • Page 62

    Troubleshooting eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 56 action possible cause alarm or condition overtemperature led is on. 1 beep every second. Ups internal temperature is too high or the fan has failed. If you have an optional maintenance byp...

  • Page 63: Silencing The Alarm

    Troubleshooting eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 57 action possible cause alarm or condition check parallel board the ups is not recognizing another parallel unit. From the ups status menu, select the units on can bus option and verify that...

  • Page 64: Service And Support

    Troubleshooting eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 58 service and support if you have any questions or problems with the ups, call your local distributor or the eaton customer support center at one of the following telephone numbers. Availabl...

  • Page 65

    Eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 59 chapter 11 warranty two-year limited warranty (usa and canada) eaton ups models: 9155, 9170+, and ferrups ® 4.3–18 kva warrantor: the warrantor for the limited warranties set forth herein is eaton (“compa...

  • Page 66

    Warranty eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 60 what this limited warranty does not cover: this warranty does not cover any defects or damages caused by: (a) failure to properly store the product before installation, including the charge of ba...

  • Page 67

    Warranty eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 61 other limitations: company's obligations under this warranty are expressly conditioned upon receipt by company of all payments due to it (including interest charges, if any). During such time as ...

  • Page 68

    Warranty eaton 9155 parallel ups (8–15 kva) user's guide s 164201592 rev d www.Eaton.Com/powerquality 62 what this guaranty does not cover: any reimbursement or repair to end-user's equipment does not include reimbursement for or restoration of any data loss. This guaranty does not cover any defects...