EB Excalibur Light Dragon User Manual - page 3
3
Congratulations on your new EXRC purchase! EXRC pilots experience superior
ight and excellence in the look and feel of our products while
commanding the skies. Now that you are an honorary EXRC pilot, we recommend
ight. Inside
ight tips, safety precautions, and care instructions to
ight missions. No need
to make sure your seats and tray tables are in the upright and locked position, no
nal
. Just follow the instructions, and enjoy your EXRC
helicopter to the fullest while commanding the skies.
BATTERY INSTALLATION & CHARGING
Installing Batteries in the Remote Controller
1. Using a Phillips-head screwdriver, remove the screw from the battery
compartment cover.
2. Insert 6 AA batteries, making sure to follow the battery polarity
(+ and -) drawing on product.
3. Replace the battery compartment cover and secure with the screw.
Charging the Helicopter
1. Make sure the controller is turned ON.
the front center of the
controller, and take out the charging wire.
3. Make sure the helicopter power is OFF.
Insert the charging plug into the
charging outlet on the helicopter.
4. The top LED light will blink when the
helicopter is charging, The bottom LED
light will turn green while charging and turn
when fully charged. Remove the plug
from the helicopter.
Requires approximately
15 minutes charge for
ight.
DO NOT OVERCHARGE
Switch
Bottom of Helicopter