EB Excalibur Light Dragon User Manual - page 4
TRIMMING HELICOPTER/DIRECTION CONTROL
Virtually no trimming is required for the Light Dragon. If the helicopter rotates
ight, use the rudder trim Knob on the top right side to adjust.
1. When the helicopter is spinning counterclockwise, turn the Rudder Trim
Knob clockwise to adjust.
2. When the helicopter is spinning clockwise, turn the Rudder Trim Knob
counterclockwise to adjust.
nger while control
forward/backward movement and turning with your thumb.
FLYING YOUR HELICOPTER
y Light Dragon features a sleek translucent body style with LED
lights that changes the chopper’s colors, making it ideal for night missions.
Getting Started
1. Select the frequency band on the controller.
2. Move the chopper’s switch to the ON position (bottom).
The helicopter will light up, indicating it is on.
3. Carefully hold the chopper in one hand, be sure the
blades are clear, press the throttle (left joy stick) from the
position all the way forward and back to “set” the band. The red light will
stop blinking. The chopper will automatically sync.
4. Place the chopper on the ground with the tail pointed toward you and the
nose facing away from you.
5. Make sure your surroundings are clear of obstacles before operating.
4
Switch
Bottom of Helicopter