EB Excalibur Light Dragon User Manual - page 5
5
Hover Up and Down
ying
steadily, you can slowly press
the throttle stick up to make
y higher, or
release the stick to make the
y lower. For
ying, only make
small movements. Adjust
trim to avoid spins.
Turning Clockwise and
Counterclockwise
Keep the helicopter at a steady height. Push the rudder stick on the right side
to the left to turn the helicopter counterclockwise. Push the rudder stick right
to turn the helicopter clockwise. Adjust trim to avoid spins.
Interference
Some radio frequencies or other R/C units nearby can cause interference and
poor performance. Try to move away from the source of the interference.
FLIGHT CONDITIONS
ight location:
• Indoor environment with little air conditions. Heavy air-conditioning can be
ight. It is also highly recommended to turn
all electric fans, air conditioning units, or reading lamps that could impair
ying.
ight be at least 10 ft. x 15 ft. x 10 ft.
CONTROL TIPS
• It is best to start with both joysticks on the remote control in the middle position.
Do not immediately push into extreme positions. Instead start by gently
easing the joystick into the position of which direction you would like to go.
• EXRC recommends for initial piloting of the helicopter, focus on learning to
ight, we recommend you
work at learning to keep the helicopter at a constant 3-foot altitude before
attempting to learn directional control of the helicopter. After the pilot has
mastered the throttle joystick, then start learning to turn with the direction
joystick.
Hover Up
and Down
Turning
Clockwise and
Counterclock-
wise
Contant
Forward
Movement