Ebac CD425 Owner's Manual - page 4
Drawing No. :- TPC127a
Issue :-
1
Date :-
26/06/03
INSTALLATION
POSITIONING:
Position the dehumidifier unit in the centre of the room to be conditioned if at all possible.
Using a spirit level ensure the unit is level in both directions. Failure to do so may result in the
drain tray overflowing and flooding of the chamber.
NOTE: Both inlet grille and outlet grille of the dehumidifier unit must have clear space around
them and not be obstructed in anyway.
WIRING:
Connect a suitably fused 3 phase mains power supply to the MAINS T/B terminal block inside
the electrical box located at the control panel end of the machine.
DRAINAGE:
Connect the outlet from the drain tray (located behind the front grille and under the evaporator
coils) to a permanent drain. Please ensure that the drainage does not rise above the level of the
CD425’s drain tray. Failure to observe this requirement will result in internal flooding of the
dehumidifier unit.
.
CD425 OWNERS MANUAL