Eberspracher EasyStart R+ Operating Instructions Manual - Displays
13
The unit cannot be used during the ”rapid red - green flashing“ signal. A running heater
can only be switched off using the button in the vehicle.
What to do if …?
Displays
Description
Communication between the mobile unit and stationary unit is not possible.
Possible causes
Remedy
Distance between mobile unit and vehicle
too large.
Reduce distance.
Dense buildings between mobile unit and
vehicle?
Change the position relative to the
vehicle e.g. hold mobile unit higher or
move it to the side. Reduce distance
from vehicle.
Several Easy Start radio remote controls
are operated simultaneously.
Reactivate mobile unit after a pause.
Mobile unit has not been taught.
Teach mobile unit as described in the
installation instruction.
Please note!
Rapid red-green flashing of the mobile unit‘s LED display
Description
Remedy
A fault occurs in the heater during opera-
tion (e.g. fuel shortage or interruption in
the diagnostics cable).
See heater‘s operating instructions for
troubleshooting advice.
Description
Remedy
Stationary unit is in learn mode.
Teach mobile unit as described in the
installation instruction.
Rapid red flashing of the mobile unit‘s LED display
Slow red-green flashing of the mobile unit‘s LED display