Ebpromotion mystere mws User Manual - The Hf Docking-Bay
Bedienungs-Anleitung Mystère Januar 2002
eb
PROmotion, Cité Robinson10 2074 Marin, Schweiz
www.ebpromotion.ch
12
Tel +41(0)32 763 05 63 Fax +41 (0)32 763 05 64 e-mail: erich@ebpromotion
The HF Docking-Bay
Even though the HF-adapters are optional, the cover of the mixer is already equipped with the
necessary contacts allowing a later upgrade without having to send the mixer to your service
office. Simply screw it on the top of the mixer using the for screws you receive with the
adapters.
The cover plates on the mixers cover protect and isolate the 64 golden contacts enabling the
use of the HF adapters.
It is forbidden to switch on the mixer without these two protection plates mounted on top of
the contacts or the adapters.
The connection between the adapters and the mixer is made through the contacts on row "A"
which are numerated continuously from 1 – 16 for each Docking Bay.
This results in the following pinning-list:
Left Docking Bay:
Contact
Connection
A1 + A2
Input CH 4
A3 + A4
Input CH 3
A5 + A6
Return left
A13 + A14
Sender left
A9
Power Supply receiver
+ (Battery tension)
A12
Power Supply transmitter + (Battery tension)
A8 + A10 + A11
Ground
Right Docking Bay:
Contact
Connection
A1 + A2
Input CH 2
A3 + A4
Input CH 1
A5 + A6
Return right
A13 + A14
Sender right
A9
Power Supply receiver
+ (Battery tension)
A12
Power Supply transmitter + (Battery tension)
A8 + A10 + A11
Ground
HF-adapter on the left Docking Bay uses inputs 3 and 4 !
HF adapter on the right Docking Bay uses inputs 1 and 2
Should this irritate and disturb the user, the pairs of internal connections may be swapped to
inverse inputs 3 and 4 against the pair of 1 and 2.
The 32 non utilised contacts are kept in reserved for future applications.