Ebpromotion mystere mws User Manual - page 4
Bedienungs-Anleitung Mystère Januar 2002
eb
PROmotion, Cité Robinson10 2074 Marin, Schweiz
www.ebpromotion.ch
3
Tel +41(0)32 763 05 63 Fax +41 (0)32 763 05 64 e-mail: erich@ebpromotion
7. „ON“
On/Off indicator
8. „REF“
Reference-tone switch with three positions
Left position (fix) =
continuous tone of 1 kHz
Right position (momentary) =
1 kHz tone as long as maintained in position
Middle position =
Off
An internal Dip-Switch allows to select between different ballistics and display modes.
(See pages 8 and 10).
9. OUT / RET
Switch for return monitoring. An internal jumper allows to select between two different
display-modes:
•
Whether the outgoing or the return signal is monitored, the display always shows the
outgoing signal.
•
The display follows the monitoring-switch. In that case, the modulation of the return
signal will be displayed in return-mode.
The standard setting on delivery is always on the outgoing signal unless otherwise
specified by the customer.
10. UNCAL CAL
Selector for calibrated output level (bypasses the master potentiometer; see point 2)
CAL = + 6dB (corresponds to position „0“ of the master potentiometers)
11. „OVL“
Indicator for overloading the microphone or line input (1 LED per channel). The LED
lights up at about –12 dB before distortion.
12. Display
20LED cover the range between – 24 dB and +5 dB. Between –9 and +5 dB the step for
each LED is 1 dB. The intensity of the LEDs brightness can be dimmed by setting the
switch "Brightness" on the control panel.