Eccotemp CEI-12 Use & Care Manual - Functions and Features
6
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483
The Eccotemp CEI-12 is a LPG fired water heater capable of delivering 2 to 2.65 gallons (up to 12
liters) of hot water almost anywhere. The unit has standard 1/2“NPT (BSP for European models)
pipe fittings.
The CEI-12 is not a toy. People around the world use similar units to heat the water in their homes,
safely, and reliably.
You may also plumb it in to existing water lines and using an appropriate LP gas regulator,
EN16129. Check local codes for proper installation.
Ignition is automatic and powered by 2 “D” cell batteries. Burners come on when water flows, and
off when the water is shut off. No pilot light!
The Purpose and Benefits the CEI-12
Functions and Features
• Water controlled automatic ignition: Water pressure between 20-80 PSI /0.25-10 bar opens the
ignition circuit for easy and convenient operation
• Auto-cut-off protection: The auto-cut-off protection will shut the gas supply off immediately in
the event of flameout to reduce the risk of gas leakage.
• Energy savings: EF of 88%
• Removable drain valve to avoid water pipe and regulator damage caused by freezing water*
• Anti-dry combustion protection: The unit will shut off the gas supply in the event water stops
flowing through the unit
*Read the maintenance section on draining the unit entirely to avoid freeze issues.