Eclipse CD 8445E Owner's Manual - Memory Stick
ESN security operating procedure
167
Cancelling ESN security lock using
Memory Stick
[MS] will appear on the display. If you
press the [DISC MS] button once
more, the display will return to [----]
(security code entry display).
ATTENTION
If a Memory Stick has already been
inserted, a [MS EJECT] message
appears. In this case, eject the Memory
Stick and insert again. (Refer to "Ejecting
the Memory Stick" on page 147 for details
on ejection of the Memory Stick.)
The recorded data will be read from
the Memory Stick.
ATTENTION
• If the contents recorded in the
Memory Stick do not match the
information recorded by the deck,
[ERR_ ] (ERR and the error
number) will appear on the display
for two seconds, and then [- - - -]
(security code entry display) will
appear. If this happens, check the
Memory Stick and repeat the
procedure from step 2.
• If [ERR5] (the 5th time an error
has occurred) appears, [HELP] will
appear. When [HELP] appears,
carry out the operations for an
ESN security lock out by following
the procedure in "What happens if
a Memory Stick or security code is
incorrect?" on page 167.
• ESN security lock cannot be
cancelled by this procedure if the
Memory Stick containing the
security code was formatted.
What happens if a Memory Stick or
security code is incorrect?
After the [HELP] message was
displayed for five seconds, serial
number will appear.
You will only get 5 unsuccessful
unlock code entries. After the 5th
attempt, you will be asked to insert
the DISC (Key CD). At this point,
please contact your local Eclipse
dealer for procedure on unlocking
the unit.
1
After the battery is connected and
the deck's power is turned on,
[SEC] will appear on the display
for two seconds. After this, [- - - -]
(security code entry display) will
appear.
2
Press the [DISC MS] button.
3
Insert the Memory Stick that has
been recorded, and then close
the front panel.
4
If the contents recorded in the
Memory Stick match the
information recorded by the deck,
[OK] will appear on the display for
two seconds, and then the deck
will return to normal operation.
1
After the 5th incorrect attempt,
the display reads [HELP] for five
seconds.
Your security code and Memory Stick
can be easily forgotten. Write the
security code and Memory Stick title in
a reminder note (See page 212).
IX