Eclipse CD 8445E Owner's Manual - Setting The Time
202
Various Settings
The selected item will be highlighted.
The selected settings will take effect.
At this time, other adjustments can
also be made in function mode.
ATTENTION
The clock display can also be turned on
and off by pressing the [6] button while
the power is turned off.
This receiver uses the 12-hour display notation.
The clock adjustment mode is
activated.
Hours or minutes will be switched
each time the button is pressed.
Turn to the right:
Turns the time forward.
Turn to the left:
Turns the time back.
At this time, other adjustments can
also be made in function mode.
You can set the demonstration screen display
to appear or not appear when the power is
turned on.
When the power turns on, the various
demonstration screens such as the audio
operation screens and motion picture screens
will appear repeatedly in the following order.
If you press a button while the demonstration
screens are being displayed, the demonstration
screens will be cancelled and the audio
operation screen will be displayed. If you do not
operate the status display function within 15
seconds, the display will return automatically to
the demo screen.
The Demo ON/OFF mode is
activated.
The selected item will be highlighted.
The selected settings will take effect.
At this time, other adjustments can
also be made in function mode.
3
Turn the [SEL] button to select
ON or OFF.
4
Press the [SEL] button.
5
Press the [RTN] button.
6
Press the [FUNC] or [RTN] button
to exit function mode.
Setting the time
1
Turn the [SEL] button to select
Clock Adjust.
2
Press the [SEL] button.
3
Press the [SEL] button to display
the item to be selected for
adjustment.
4
Turn the [SEL] button.
5
Press the [RTN] button.
6
Press the [FUNC] or [RTN] button
to exit function mode.
Switching demonstration
screen display
1
Turn the [SEL] button to select
the Demo.
2
Press the [SEL] button.
3
Turn the [SEL] button to select
ON or OFF.
4
Press the [SEL] button.
5
Press the [RTN] button.
6
Press the [FUNC] or [RTN] button
to exit function mode.