Eclipse CD 8445E Owner's Manual - Non-Fader Phase Selection
How to operate the Sound Adjustment Mode
185
Non-Fader phase selection
(Non-F Phase)
The merging of sound between the front and
rear speakers and the woofer can be improved
by selecting the phase.
Switch to a phase which lets the speakers
combine without any disharmony.
The mode will change to phase
selection mode.
NORMAL:
Normal phase
REVERSE:
Reverse phase
The selected settings will take effect.
At this time, other adjustments can
also be made in normal mode.
Non-Fader Output
Non-Fader Output can be stereo or mono.
Select the method that matches the output
method for the sub-woofer system that is
connected to the deck.
The mode will change to Non-F
Output.
At this time, other adjustments can
also be made in normal mode.
Importing Sound Data
Sound data adjusted by the website can be
downloaded to a CD-R or a Memory Stick and
imported into the deck.
ATTENTION
For details on the operation, please
contact your dealer.
The mode will change to Sound Data
mode.
1
Turn the [SEL] button to select
Non-F Phase.
2
Press the [SEL] button.
3
Turn the [SEL] button to select
NORMAL or REVERSE.
4
Press the [SEL] button.
5
Press the [RTN] button.
6
Press the [SOUND] or [RTN]
button to exit sound adjustment
mode.
1
Turn the [SEL] button to select
Non-F Output.
2
Press the [SEL] button.
3
Turn the [SEL] button to select
Stereo or Monaural.
4
Press the [SEL] button.
5
Press the [RTN] button.
6
Press the [SOUND] or [RTN]
button to exit sound adjustment
mode.
1
Turn the [SEL] button to select
Sound Data.
2
Press the [SEL] button.
XII